[MITgcm-support] Monitor statistics are all zeros except time and vorticity
Xiangming Zeng
xzeng2 at ncsu.edu
Sat Jun 14 21:41:01 EDT 2014
Hi Jean-Michel and Dustin,
Thank you for all your help. Attached is my data file.
As Jean-Michel suggested, I checked the hFacC file, and all the values of
that file are zeros. That's why all the output values are zeros. After
checking my data file, I found I made a stupid mistake about the vertical
coordinate setting. In order to avoid the "too SMALL rStarFacW" error, I
set hFacMin to be 2.5. According to the manual, it should be less or equal
to 1, right? After changing hFacMin to 0.2 and HfacminDr to 5, I got the
nonzero outputs. Thanks again for all your help.
I'm a beginner of MITgcm. There must be some inappropriate settings in my
data file. I'd appreciate some comments on my settings. Thank you so much.
All the best,
Xiangming
On Sat, Jun 14, 2014 at 12:00 PM, <mitgcm-support-request at mitgcm.org> wrote:
> Send MITgcm-support mailing list submissions to
> mitgcm-support at mitgcm.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mitgcm.org/mailman/listinfo/mitgcm-support
> or, via email, send a message with subject or body 'help' to
> mitgcm-support-request at mitgcm.org
>
> You can reach the person managing the list at
> mitgcm-support-owner at mitgcm.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of MITgcm-support digest..."
>
>
> Today's Topics:
>
> 1. Monitor statistics are all zeros except time and vorticity
> (Xiangming Zeng)
> 2. Re: Monitor statistics are all zeros except time and
> vorticity (Dustin Carroll)
> 3. Re: Monitor statistics are all zeros except time and
> vorticity (Jean-Michel Campin)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 13 Jun 2014 16:43:28 -0400
> From: Xiangming Zeng <xzeng2 at ncsu.edu>
> To: mitgcm-support at mitgcm.org
> Subject: [MITgcm-support] Monitor statistics are all zeros except time
> and vorticity
> Message-ID:
> <CAMneee+XC+vjgq8xBpS+ovTTOVnz+9xR7nAH6kZ_=
> gFHfcMm8Q at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi all,
>
> I ran into a wired problem. The model can run without error. All my monitor
> statistics fields are zeros except time and vorticity. Any idea about the
> possible reason? Thanks.
>
> --
> Xiangming Zeng
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://mitgcm.org/pipermail/mitgcm-support/attachments/20140613/e0d07597/attachment.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Fri, 13 Jun 2014 13:49:28 -0700
> From: Dustin Carroll <dcarroll at uoregon.edu>
> To: mitgcm-support at mitgcm.org
> Subject: Re: [MITgcm-support] Monitor statistics are all zeros except
> time and vorticity
> Message-ID: <E87F2F57-481A-475C-A61C-55314220EED2 at uoregon.edu>
> Content-Type: text/plain; charset=us-ascii
>
> Can you provide more info about your model setup and data files?
>
> Dustin
>
> On Jun 13, 2014, at 1:43 PM, Xiangming Zeng <xzeng2 at ncsu.edu> wrote:
>
> > Hi all,
> >
> > I ran into a wired problem. The model can run without error. All my
> monitor statistics fields are zeros except time and vorticity. Any idea
> about the possible reason? Thanks.
> >
> > --
> > Xiangming Zeng
> > _______________________________________________
> > MITgcm-support mailing list
> > MITgcm-support at mitgcm.org
> > http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 13 Jun 2014 16:52:54 -0400
> From: Jean-Michel Campin <jmc at ocean.mit.edu>
> To: mitgcm-support at mitgcm.org
> Subject: Re: [MITgcm-support] Monitor statistics are all zeros except
> time and vorticity
> Message-ID: <20140613205254.GA21587 at ocean.mit.edu>
> Content-Type: text/plain; charset=us-ascii
>
> Hi Xiangming,
> May be your domain is completely empty (can check hFacC file) ?
> This could happen when the bathymetry file (which defines the position
> of the ocean bottom) contains only positive values.
> Cheers,
> Jean-Michel
>
> On Fri, Jun 13, 2014 at 04:43:28PM -0400, Xiangming Zeng wrote:
> > Hi all,
> >
> > I ran into a wired problem. The model can run without error. All my
> monitor
> > statistics fields are zeros except time and vorticity. Any idea about the
> > possible reason? Thanks.
> >
> > --
> > Xiangming Zeng
>
> > _______________________________________________
> > MITgcm-support mailing list
> > MITgcm-support at mitgcm.org
> > http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
>
>
> ------------------------------
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
> End of MITgcm-support Digest, Vol 132, Issue 10
> ***********************************************
>
--
Xiangming Zeng
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140614/f8f61ae9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: data
Type: application/octet-stream
Size: 5724 bytes
Desc: not available
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140614/f8f61ae9/attachment.obj>
More information about the MITgcm-support
mailing list