[MITgcm-support] EXF and Calendar Package
Andres Fernandez
andres.fernandez at nyu.edu
Mon Aug 4 18:46:54 EDT 2014
Data file, STDOUT.0000 and the .e file that is generated are attached...
the STDERR.0000 is blank, so i did not attach it.
@Nicolas, I was not aware of this limitation of irregular spacing. Any
comments from other users?
Thank you all!
*Andres Fernandez*
Undergraduate Chemical Engineering
New York University Abu Dhabi - 2015
Mobile (USA): +1 646 717 2231
*Think before printing. The environment is in our hands
On Mon, Aug 4, 2014 at 5:23 PM, Dustin Carroll <dcarroll at uoregon.edu> wrote:
> Hi Andres,
>
> It would be helpful for you to share your data file...plus the last few
> lines from STDOUT.0000 and the output from STDERR.0000.
>
> Dustin
>
> On Aug 4, 2014, at 7:15 PM, Andres Fernandez <andres.fernandez at nyu.edu>
> wrote:
>
> Dear Dustin,
> I realized I had a comma missing in the list when copying you the delR
> declaration. I have an irregular spacing declared as follows: So, thank
> you.
>
> delR= 5.0,
> 5.0,
> 5.0,
> 5.0,
> 5.0,
> 5.0,
> 5.0,
> 5.0,
> 5.0,
> 5.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 10.0,
> 50.0,
> 50.0,
> 50.0,
> 50.0,
> 50.0,
> &
>
>
>
>
> ** I do still get an error though!
>
> forrtl: severe (24): end-of-file during read, unit 11, file
> .../fortzlTn72 line 8, position 0
> "" ... / fort5xkez2
> "" .../ fort2YWOn2fort5xkez2
> and a bunch more files..
>
> Unsure if you could assist with this error?
>
> @Jean- Michel, I have ran a couple models before and the struggle I have
> right now is with external forcing, I want to add precipitation and
> evaporation and I am not succeeding. I have not found any comprehensive
> information on the manual.
>
>
>
> *Andres Fernandez*
> Undergraduate Chemical Engineering
> New York University Abu Dhabi - 2015
> Mobile (USA): +1 646 717 2231
>
> *Think before printing. The environment is in our hands
>
>
> On Mon, Aug 4, 2014 at 3:58 PM, Dustin Carroll <dcarroll at uoregon.edu>
> wrote:
>
>> Hi Andres,
>>
>> The vertical grid spacing (delZ, delP, or delR) is set in your data file.
>> You can specific with a *.bin file, i.e delRfile='dz. bin'
>>
>> or without a bin file...delR=100*10
>>
>> Cheers,
>> Dustin
>>
>>
>>
>>
>> On Aug 4, 2014, at 5:43 PM, Andres Fernandez <andres.fernandez at nyu.edu>
>> wrote:
>>
>> Dear support,
>>
>> I get the (PID.TID 0001.0001) *** ERROR *** S/R INI_PARMS: No value for
>> delZ/delP/delR at k = 16 ....25
>> I am unsure where to set these initial conditions... or is this when I
>> build it?
>>
>> Did I build it incorrectly?
>>
>> Thank you
>>
>> *Andres Fernandez*
>> Undergraduate Chemical Engineering
>> New York University Abu Dhabi - 2015
>> Mobile (USA): +1 646 717 2231
>>
>> *Think before printing. The environment is in our hands
>>
>>
>> On Thu, Jul 31, 2014 at 8:34 PM, Dustin Carroll <dcarroll at uoregon.edu>
>> wrote:
>>
>>> Hi Andres,
>>>
>>> You can debug this further by looking at your STDERR.0000 file for more
>>> specific error information... also take a look at STDOUT.0000 to see where
>>> your model crashed. You probably have a syntax error in one of your data
>>> files.
>>>
>>> Cheers,
>>> Dustin
>>>
>>>
>>> On Jul 31, 2014, at 9:21 PM, Andres Fernandez <andres.fernandez at nyu.edu>
>>> wrote:
>>>
>>> So I recompiled the executable; and placed it in my input folder;
>>>
>>> I have the following folders:
>>>
>>> data
>>> data.cal
>>> data.exf
>>> data.obcs
>>> data.pkg
>>> data.rbcs
>>> eedata
>>> eedata.mth
>>> executable
>>> (some binary files)
>>>
>>> And I get this error when I run:
>>> ABNORMAL END: S/R INI_PARMS
>>>
>>> Thank you for your assistance.
>>>
>>>
>>> Best,
>>> Andres
>>>
>>> *Andres Fernandez*
>>> Mobile (USA): +1 646 717 2231
>>>
>>> *Think before printing. The environment is in our hands
>>>
>>>
>>> On Thu, Jul 31, 2014 at 3:46 PM, Dustin Carroll <dcarroll at uoregon.edu>
>>> wrote:
>>>
>>>> Hi Andres,
>>>>
>>>> also, under code/packages.conf add the line:
>>>>
>>>> cal
>>>>
>>>> and recompile. Then you should be fine with useEXF=.TRUE., in your
>>>> data.pkg file.
>>>>
>>>> Cheers,
>>>>
>>>>
>>>> Dustin
>>>>
>>>> On Jul 31, 2014, at 3:53 PM, Andres Fernandez <andres.fernandez at nyu.edu>
>>>> wrote:
>>>>
>>>> Thank you!
>>>> So building a code with the following packages should allow me to use
>>>> external forcing correctly?
>>>>
>>>> # Packages
>>>> &PACKAGES
>>>> useOBCS=.TRUE.,
>>>> usePtracers=.FALSE.,
>>>> useRBCS=.FALSE.,
>>>> useEXF=.TRUE.,
>>>> #useLayers=.TRUE.,
>>>> &
>>>>
>>>> Best,
>>>> Andres
>>>>
>>>> *Andres Fernandez*
>>>> Undergraduate Chemical Engineering
>>>> New York University Abu Dhabi - 2015
>>>> Mobile (USA): +1 646 717 2231
>>>>
>>>> *Think before printing. The environment is in our hands
>>>>
>>>>
>>>> On Thu, Jul 31, 2014 at 12:08 PM, Jean-Michel Campin <jmc at ocean.mit.edu
>>>> > wrote:
>>>>
>>>>> Hi Andres,
>>>>>
>>>>> Since pkg/exf requires the use of calendar package (pkg/cal),
>>>>> this later (pkg/cal) is always compiled (MITgcm/pkg/pkg_depend)
>>>>> and used (in: model/src/packages_boot.F: IF (useEXF) useCAL = .TRUE.)
>>>>> anytime pkg/exf is compiled and used.
>>>>>
>>>>> Cheers,
>>>>> Jean-Michel
>>>>>
>>>>> On Thu, Jul 31, 2014 at 11:30:08AM -0400, Andres Fernandez wrote:
>>>>> > Dear MITgcm support,
>>>>> >
>>>>> > I have been trying to run the external forcing package; and I have
>>>>> yet to
>>>>> > succeed, but I was wondering if a reason why it is not working is
>>>>> because I
>>>>> > do not have the calendar package?
>>>>> >
>>>>> > Thank you,
>>>>> >
>>>>> > *Andres Fernandez*
>>>>> > Mobile (USA): +1 646 717 2231
>>>>> >
>>>>> > *Think before printing. The environment is in our hands
>>>>>
>>>>> > _______________________________________________
>>>>> > MITgcm-support mailing list
>>>>> > MITgcm-support at mitgcm.org
>>>>> > http://mitgcm.org/mailman/listinfo/mitgcm-support
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> MITgcm-support mailing list
>>>>> MITgcm-support at mitgcm.org
>>>>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>>>>
>>>>
>>>> _______________________________________________
>>>> MITgcm-support mailing list
>>>> MITgcm-support at mitgcm.org
>>>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> MITgcm-support mailing list
>>>> MITgcm-support at mitgcm.org
>>>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>>>
>>>>
>>> _______________________________________________
>>> MITgcm-support mailing list
>>> MITgcm-support at mitgcm.org
>>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>>
>>>
>>>
>>> _______________________________________________
>>> MITgcm-support mailing list
>>> MITgcm-support at mitgcm.org
>>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>>
>>>
>> _______________________________________________
>> MITgcm-support mailing list
>> MITgcm-support at mitgcm.org
>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>
>>
>>
>> _______________________________________________
>> MITgcm-support mailing list
>> MITgcm-support at mitgcm.org
>> http://mitgcm.org/mailman/listinfo/mitgcm-support
>>
>>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140804/0c81d8bd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: STDOUT.0000.odt
Type: application/vnd.oasis.opendocument.text
Size: 18642 bytes
Desc: not available
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140804/0c81d8bd/attachment-0003.odt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DATA.odt
Type: application/vnd.oasis.opendocument.text
Size: 13506 bytes
Desc: not available
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140804/0c81d8bd/attachment-0004.odt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dotEfile.odt
Type: application/vnd.oasis.opendocument.text
Size: 11762 bytes
Desc: not available
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140804/0c81d8bd/attachment-0005.odt>
More information about the MITgcm-support
mailing list