[MITgcm-support] compile error
Jean-Michel Campin
jmc at ocean.mit.edu
Wed Aug 11 14:05:07 EDT 2010
Hi,
You are reporting compiler warnings which are quite dependent
on compiler, compiler flags, or even compiler version.
(it could have been useful to mentionned which optfile
you are using).
In general, most of them can be ignored (for instance
unintialized variable warnings
and regarding the 5 you found:
1) this is normal (with a 2-D set-up) and cause no problem.
2) uninitialised variable which can be ignored.
3) unused variables cause no harm (we try to remove them,
but there are still a lot, and they tend to come back)
4) is more tricky, but the code is safe: S/R MPI_RECV has an argument
(the 3rd one) which define the type of the 1rst argument, so that
it's normal to see calls to MPI_RECV with different 1rst argument type.
5) is an internal compiler warning about uncompatible compiler flags.
(see your optfile)
CHeers,
Jean-Michel
On Sun, Aug 01, 2010 at 10:31:27PM -0700, q li wrote:
> Hi all,
>
> Recently I am trying to run the MITgcm on my laptop (64 bit intel Core i5,
> Redhat Enterprise Linux 5.5 on VMware, mpich-2, GNU compiler). When I try
> verification/internal_waves, I get following warnings (without MPI (# BUILD
> 1) or without MPI (# BUILD 2)). I can run the code and get result in this case,
> but I failed to run my own code.
>
> Following build options and warning messages are very long. I summarized in
> following 5 types of warnings. I do worry that these warnings may affact my
> calculation.
>
> (1) Would this affact my calculation? I cannot see anything wrong in fortran
> grammer. Does it mean 1-Oly+4:sNy+Oly-3 is only one step?
>
>
> gad_os7mp_adv_y.f: In subroutine `gad_os7mp_adv_y':
> gad_os7mp_adv_y.f:1820: warning:
> DO j=1-Oly+4,sNy+Oly-3
> ^
> Iterative DO loop begin, end, and step-count values known to result in no
> iterations at (^)
>
> (2) For this warning, I have looked up '\"print.f" in line 3190:
>
> Real*8 val
> Should there be a global file to define 'val'?
>
> print.f: In subroutine `print_maprs':
> In file included from print.f:0:
> print.f:3190: warning: 'val' might be used uninitialized in this function
>
> (3) With mpich, I got this:
>
> exch_r4_recv_get_x.f: In subroutine `exch_r4_recv_get_x':
> In file included from exch_r4_recv_get_x.f:0:
> exch_r4_recv_get_x.f:1680: warning: unused variable 'preqi'
>
> I assume this does not matter. Am I right?
>
> (4) With mpich, I also got this
>
> gather_2d_r4.f: In subroutine `gather_2d_r4':
> gather_2d_r4.f:1458: warning:
> CALL MPI_RECV (temp, lbuff, MPI_REAL,
> 1
> gather_2d_r4.f:1488: (continued):
> CALL MPI_RECV (ready_to_receive, 1, MPI_INTEGER,
> 2
> Argument #1 of `mpi_recv' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
>
> Is anything wrong with my mpich installation?
>
> (5) Warning is like this:
>
> cc1: warning: -Wuninitialized is not supported without -O
> f771: warning: -Wuninitialized is not supported without -O
>
> I have alread had -O3. I add -O, too?
>
> Any one had same warnings before? Should I just turn off the warning options
> like -Wall, etc. in option file? Thanks in advance.
>
> Li
>
>
>
>
> =======================BUILD 1; WITHOUT MPICH=======================
>
> =======================BUILD OPITON=======================
> #!/bin/bash
> #
> # $Header: /u/gcmpack/MITgcm/tools/build_options/linux_ia64_g77,v 1.4 2010/03/21
> 22:22:53 jmc Exp $
> # $Name: $
> FC=g77
> CC=gcc
> DEFINES='-D_BYTESWAPIO -DWORDLENGTH=4'
> CPP='cpp -traditional -P'
> NOOPTFLAGS='-O0'
> # For IEEE, use the "-ffloat-store" option
> if test "x$IEEE" = x ; then
> FFLAGS='-Wimplicit -Wunused -Wuninitialized'
> FOPTIM='-O3 -funroll-loops'
> else
> FFLAGS='-Wimplicit -Wunused -ffloat-store'
> FOPTIM='-O0'
> fi
>
> =======================WARNING MESSAGE FOR BUILD 1 WITHOUT
> MPICH=======================
>
> [hiphop at localhost build1]$ genmake2 -rd=/home/hiphop/MITgcm
> -of=/home/hiphop/SCS2D/linux_ia64_g77 -mods=../code
> make depend
> make > makeoutput
> [hiphop at localhost build1]$ make > makeoutput
> gad_os7mp_adv_y.f: In subroutine `gad_os7mp_adv_y':
> gad_os7mp_adv_y.f:1820: warning:
> DO j=1-Oly+4,sNy+Oly-3
> ^
> Iterative DO loop begin, end, and step-count values known to result in no
> iterations at (^)
> print.f: In subroutine `print_maprs':
> In file included from print.f:0:
> print.f:3190: warning: 'val' might be used uninitialized in this function
> print.f:3195: warning: 'accbase' might be used uninitialized in this function
> print.f:3195: warning: 'dwnbase' might be used uninitialized in this function
> print.f:3195: warning: 'pltbase' might be used uninitialized in this function
> print.f:3196: warning: 'accstep' might be used uninitialized in this function
> print.f:3196: warning: 'dwnstep' might be used uninitialized in this function
> print.f:3196: warning: 'pltstep' might be used uninitialized in this function
> print.f:3197: warning: 'accblo' might be used uninitialized in this function
> print.f:3197: warning: 'dwnblo' might be used uninitialized in this function
> print.f:3197: warning: 'pltblo' might be used uninitialized in this function
> print.f:3198: warning: 'accbhi' might be used uninitialized in this function
> print.f:3198: warning: 'dwnbhi' might be used uninitialized in this function
> print.f:3198: warning: 'pltbhi' might be used uninitialized in this function
> print.f:3199: warning: 'accbstr' might be used uninitialized in this function
> print.f:3199: warning: 'dwnbstr' might be used uninitialized in this function
> print.f:3199: warning: 'pltbstr' might be used uninitialized in this function
> print.f:3200: warning: 'accmin' might be used uninitialized in this function
> print.f:3200: warning: 'dwnmin' might be used uninitialized in this function
> print.f:3200: warning: 'pltmin' might be used uninitialized in this function
> print.f:3201: warning: 'accmax' might be used uninitialized in this function
> print.f:3201: warning: 'dwnmax' might be used uninitialized in this function
> print.f:3201: warning: 'pltmax' might be used uninitialized in this function
> print.f:3202: warning: 'accstr' might be used uninitialized in this function
> print.f:3202: warning: 'dwnstr' might be used uninitialized in this function
> print.f:3202: warning: 'pltstr' might be used uninitialized in this function
> print.f: In subroutine `print_maprl':
> print.f:3927: warning: 'val' might be used uninitialized in this function
> print.f:3932: warning: 'accbase' might be used uninitialized in this function
> print.f:3932: warning: 'dwnbase' might be used uninitialized in this function
> print.f:3932: warning: 'pltbase' might be used uninitialized in this function
> print.f:3933: warning: 'accstep' might be used uninitialized in this function
> print.f:3933: warning: 'dwnstep' might be used uninitialized in this function
> print.f:3933: warning: 'pltstep' might be used uninitialized in this function
> print.f:3934: warning: 'accblo' might be used uninitialized in this function
> print.f:3934: warning: 'dwnblo' might be used uninitialized in this function
> print.f:3934: warning: 'pltblo' might be used uninitialized in this function
> print.f:3935: warning: 'accbhi' might be used uninitialized in this function
> print.f:3935: warning: 'dwnbhi' might be used uninitialized in this function
> print.f:3935: warning: 'pltbhi' might be used uninitialized in this function
> print.f:3936: warning: 'accbstr' might be used uninitialized in this function
> print.f:3936: warning: 'dwnbstr' might be used uninitialized in this function
> print.f:3936: warning: 'pltbstr' might be used uninitialized in this function
> print.f:3937: warning: 'accmin' might be used uninitialized in this function
> print.f:3937: warning: 'dwnmin' might be used uninitialized in this function
> print.f:3937: warning: 'pltmin' might be used uninitialized in this function
> print.f:3938: warning: 'accmax' might be used uninitialized in this function
> print.f:3938: warning: 'dwnmax' might be used uninitialized in this function
> print.f:3938: warning: 'pltmax' might be used uninitialized in this function
> print.f:3939: warning: 'accstr' might be used uninitialized in this function
> print.f:3939: warning: 'dwnstr' might be used uninitialized in this function
> print.f:3939: warning: 'pltstr' might be used uninitialized in this function
> cg2d.f: In subroutine `cg2d':
> In file included from cg2d.f:0:
> cg2d.f:1746: warning: 'rhsnorm' might be used uninitialized in this function
> ini_p_ground.f: In subroutine `ini_p_ground':
> In file included from ini_p_ground.f:0:
> ini_p_ground.f:2977: warning: 'dphvr' might be used uninitialized in this
> function
> ini_p_ground.f:2979: warning: 'recip_kappa__' might be used uninitialized in
> this function
> ini_p_ground.f:2980: warning: 'psnorm' might be used uninitialized in this
> function
> cc1: warning: -Wuninitialized is not supported without -O
> f771: warning: -Wuninitialized is not supported without -O
> the_model_main.f: In subroutine `the_model_main':
> In file included from the_model_main.f:0:
> the_model_main.f:2164: warning: unused variable 'exst'
>
>
> =======================# BUILD 2: WITH MPICH=======================
>
> =======================BUILD OPTION=======================
> #!/bin/bash
> #
> # $Header: /u/gcmpack/MITgcm/tools/build_options/linux_ia32_g77+mpi_aces,v 1.3
> 2008/05/17 23:35:04 jmc Exp $
> # $Name: $
> #
> # These are the build options used with the GNU compiler for the
> # daily testing on ACES (which are initiated by cron jobs on the "ao"
> # head node).
> #
> # Please note the appropriate module command:
> #
> # module add mpich/gnu
> #
> DEFINES='-DALLOW_USE_MPI -DALWAYS_USE_MPI -D_BYTESWAPIO -DWORDLENGTH=4'
> CPP='cpp -traditional -P'
> FC='mpif77'
> CC='mpicc'
> LINK='mpif77'
> LIBS='-L/usr/local/mpich-gfortran/lib '
> INCLUDES='-I/usr/local/mpich-gfortran/include '
> EXTENDED_SRC_FLAG='-ffixed-line-length-132'
> if test "x$IEEE" = x ; then
> # No need for IEEE-754
> # FFLAGS='-Wimplicit -Wunused -Wuninitialized'
> # FOPTIM='-O3 -funroll-loops'
> #- note(jmc):
> # -O3 is not always faster than -O2 ; sse & sse2 are faster ;
> # Problems with "-funroll-loops" for some set-up, e.g. tutorial_helt_suarez_cs
> FFLAGS='-Wimplicit -Wunused -Wuninitialized -mfpmath=sse -msse -msse2'
> # FOPTIM='-O3 -malign-double'
> FOPTIM='-O3'
> else
> # Try to follow IEEE-754
> # FFLAGS='-Wimplicit -Wunused -ffloat-store'
> FFLAGS='-Wimplicit -Wunused -mfpmath=sse -msse -msse2'
> # FOPTIM='-O0 -malign-double'
> FOPTIM='-O0'
> fi
> NOOPTFLAGS='-O0'
>
> =======================WARNING MESSAGE FOR BUILD 2=======================
>
> [hiphop at localhost build2]$ make > makeoutput
> gad_os7mp_adv_y.f: In subroutine `gad_os7mp_adv_y':
> gad_os7mp_adv_y.f:1820: warning:
> DO j=1-Oly+4,sNy+Oly-3
> ^
> Iterative DO loop begin, end, and step-count values known to result in no
> iterations at (^)
> exch_r4_recv_get_x.f: In subroutine `exch_r4_recv_get_x':
> In file included from exch_r4_recv_get_x.f:0:
> exch_r4_recv_get_x.f:1680: warning: unused variable 'preqi'
> exch_r4_recv_get_y.f: In subroutine `exch_r4_recv_get_y':
> In file included from exch_r4_recv_get_y.f:0:
> exch_r4_recv_get_y.f:1682: warning: unused variable 'preqi'
> exch_r8_recv_get_x.f: In subroutine `exch_r8_recv_get_x':
> In file included from exch_r8_recv_get_x.f:0:
> exch_r8_recv_get_x.f:1680: warning: unused variable 'preqi'
> exch_r8_recv_get_y.f: In subroutine `exch_r8_recv_get_y':
> In file included from exch_r8_recv_get_y.f:0:
> exch_r8_recv_get_y.f:1682: warning: unused variable 'preqi'
> exch_rl_recv_get_x.f: In subroutine `exch_rl_recv_get_x':
> In file included from exch_rl_recv_get_x.f:0:
> exch_rl_recv_get_x.f:1680: warning: unused variable 'preqi'
> exch_rl_recv_get_y.f: In subroutine `exch_rl_recv_get_y':
> In file included from exch_rl_recv_get_y.f:0:
> exch_rl_recv_get_y.f:1682: warning: unused variable 'preqi'
> exch_rs_recv_get_x.f: In subroutine `exch_rs_recv_get_x':
> In file included from exch_rs_recv_get_x.f:0:
> exch_rs_recv_get_x.f:1680: warning: unused variable 'preqi'
> exch_rs_recv_get_y.f: In subroutine `exch_rs_recv_get_y':
> In file included from exch_rs_recv_get_y.f:0:
> exch_rs_recv_get_y.f:1682: warning: unused variable 'preqi'
> gather_2d_r4.f: In subroutine `gather_2d_r4':
> gather_2d_r4.f:1458: warning:
> CALL MPI_RECV (temp, lbuff, MPI_REAL,
> 1
> gather_2d_r4.f:1488: (continued):
> CALL MPI_RECV (ready_to_receive, 1, MPI_INTEGER,
> 2
> Argument #1 of `mpi_recv' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_2d_r4.f:1456: warning:
> CALL MPI_SEND (ready_to_receive, 1, MPI_INTEGER,
> 1
> gather_2d_r4.f:1490: (continued):
> CALL MPI_SEND (myField, lbuff, MPI_REAL,
> 2
> Argument #1 of `mpi_send' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_2d_r8.f: In subroutine `gather_2d_r8':
> gather_2d_r8.f:1458: warning:
> CALL MPI_RECV (temp, lbuff, MPI_REAL8,
> 1
> gather_2d_r8.f:1488: (continued):
> CALL MPI_RECV (ready_to_receive, 1, MPI_INTEGER,
> 2
> Argument #1 of `mpi_recv' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_2d_r8.f:1456: warning:
> CALL MPI_SEND (ready_to_receive, 1, MPI_INTEGER,
> 1
> gather_2d_r8.f:1490: (continued):
> CALL MPI_SEND (myField, lbuff, MPI_REAL8,
> 2
> Argument #1 of `mpi_send' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_vector.f: In subroutine `gather_vector':
> gather_vector.f:1440: warning:
> CALL MPI_RECV (temp, lbuff, MPI_DOUBLE_PRECISION,
> 1
> gather_vector.f:1464: (continued):
> CALL MPI_RECV (ready_to_receive, 1, MPI_INTEGER,
> 2
> Argument #1 of `mpi_recv' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_vector.f:1438: warning:
> CALL MPI_SEND (ready_to_receive, 1, MPI_INTEGER,
> 1
> gather_vector.f:1466: (continued):
> CALL MPI_SEND (local, lbuff, MPI_DOUBLE_PRECISION,
> 2
> Argument #1 of `mpi_send' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_xz.f: In subroutine `gather_xz':
> gather_xz.f:1442: warning:
> CALL MPI_RECV (temp, lbuff, MPI_DOUBLE_PRECISION,
> 1
> gather_xz.f:1459: (continued):
> CALL MPI_RECV (ready_to_receive, 1, MPI_INTEGER,
> 2
> Argument #1 of `mpi_recv' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_xz.f:1440: warning:
> CALL MPI_SEND (ready_to_receive, 1, MPI_INTEGER,
> 1
> gather_xz.f:1461: (continued):
> CALL MPI_SEND (local, lbuff, MPI_DOUBLE_PRECISION,
> 2
> Argument #1 of `mpi_send' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_yz.f: In subroutine `gather_yz':
> gather_yz.f:1442: warning:
> CALL MPI_RECV (temp, lbuff, MPI_DOUBLE_PRECISION,
> 1
> gather_yz.f:1459: (continued):
> CALL MPI_RECV (ready_to_receive, 1, MPI_INTEGER,
> 2
> Argument #1 of `mpi_recv' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> gather_yz.f:1440: warning:
> CALL MPI_SEND (ready_to_receive, 1, MPI_INTEGER,
> 1
> gather_yz.f:1461: (continued):
> CALL MPI_SEND (local, lbuff, MPI_DOUBLE_PRECISION,
> 2
> Argument #1 of `mpi_send' is one type at (2) but is some other type at (1) [info
> -f g77 M GLOBALS]
> global_max.f: In subroutine `global_max_r8':
> global_max.f:1476: warning:
> CALL MPI_Allreduce(tmp,maxPhi,1,MPI_REAL,MPI_MAX,
> 1
> global_max.f:2685: (continued):
> CALL MPI_Allreduce(tmp,maxPhi,1,MPI_DOUBLE_PRECISION,MPI_MAX,
> 2
> Argument #1 of `mpi_allreduce' is one precision at (2) but is some other
> precision at (1) [info -f g77 M GLOBALS]
> global_max.f:1476: warning:
> CALL MPI_Allreduce(tmp,maxPhi,1,MPI_REAL,MPI_MAX,
> 1
> global_max.f:2685: (continued):
> CALL MPI_Allreduce(tmp,maxPhi,1,MPI_DOUBLE_PRECISION,MPI_MAX,
> 2
> Argument #2 of `mpi_allreduce' is one precision at (2) but is some other
> precision at (1) [info -f g77 M GLOBALS]
> global_sum.f: In subroutine `global_sum_r8':
> global_sum.f:1487: warning:
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_REAL,MPI_SUM,
> 1
> global_sum.f:2714: (continued):
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_DOUBLE_PRECISION,MPI_SUM,
> 2
> Argument #1 of `mpi_allreduce' is one precision at (2) but is some other
> precision at (1) [info -f g77 M GLOBALS]
> global_sum.f:1487: warning:
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_REAL,MPI_SUM,
> 1
> global_sum.f:2714: (continued):
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_DOUBLE_PRECISION,MPI_SUM,
> 2
> Argument #2 of `mpi_allreduce' is one precision at (2) but is some other
> precision at (1) [info -f g77 M GLOBALS]
> global_sum.f: In subroutine `global_sum_int':
> global_sum.f:1487: warning:
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_REAL,MPI_SUM,
> 1
> global_sum.f:3939: (continued):
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_INTEGER,MPI_SUM,
> 2
> Argument #1 of `mpi_allreduce' is one type at (2) but is some other type at (1)
> [info -f g77 M GLOBALS]
> global_sum.f:1487: warning:
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_REAL,MPI_SUM,
> 1
> global_sum.f:3939: (continued):
> CALL MPI_Allreduce(tmp,sumPhi,1,MPI_INTEGER,MPI_SUM,
> 2
> Argument #2 of `mpi_allreduce' is one type at (2) but is some other type at (1)
> [info -f g77 M GLOBALS]
> global_vec_sum.f: In subroutine `global_vec_sum_r8':
> global_vec_sum.f:1481: warning:
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_REAL,
> 1
> global_vec_sum.f:2702: (continued):
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_DOUBLE_PRECISION,
> 2
> Argument #1 of `mpi_allreduce' is one precision at (2) but is some other
> precision at (1) [info -f g77 M GLOBALS]
> global_vec_sum.f:1481: warning:
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_REAL,
> 1
> global_vec_sum.f:2702: (continued):
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_DOUBLE_PRECISION,
> 2
> Argument #2 of `mpi_allreduce' is one precision at (2) but is some other
> precision at (1) [info -f g77 M GLOBALS]
> global_vec_sum.f: In subroutine `global_vec_sum_int':
> global_vec_sum.f:1481: warning:
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_REAL,
> 1
> global_vec_sum.f:3924: (continued):
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_INTEGER,
> 2
> Argument #1 of `mpi_allreduce' is one type at (2) but is some other type at (1)
> [info -f g77 M GLOBALS]
> global_vec_sum.f:1481: warning:
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_REAL,
> 1
> global_vec_sum.f:3924: (continued):
> CALL MPI_Allreduce(tmp1,tmp2,nval,MPI_INTEGER,
> 2
> Argument #2 of `mpi_allreduce' is one type at (2) but is some other type at (1)
> [info -f g77 M GLOBALS]
> ini_procs.f: In subroutine `ini_procs':
> In file included from ini_procs.f:0:
> ini_procs.f:1430: warning: unused variable 'mpirequest'
> ini_procs.f:1430: warning: unused variable 'mpibufsize'
> ini_procs.f:1429: warning: unused variable 'istatus'
> print.f: In subroutine `print_maprs':
> In file included from print.f:0:
> print.f:4432: warning: 'val' might be used uninitialized in this function
> print.f:4437: warning: 'accbase' might be used uninitialized in this function
> print.f:4437: warning: 'dwnbase' might be used uninitialized in this function
> print.f:4437: warning: 'pltbase' might be used uninitialized in this function
> print.f:4438: warning: 'accstep' might be used uninitialized in this function
> print.f:4438: warning: 'dwnstep' might be used uninitialized in this function
> print.f:4438: warning: 'pltstep' might be used uninitialized in this function
> print.f:4439: warning: 'accblo' might be used uninitialized in this function
> print.f:4439: warning: 'dwnblo' might be used uninitialized in this function
> print.f:4439: warning: 'pltblo' might be used uninitialized in this function
> print.f:4440: warning: 'accbhi' might be used uninitialized in this function
> print.f:4440: warning: 'dwnbhi' might be used uninitialized in this function
> print.f:4440: warning: 'pltbhi' might be used uninitialized in this function
> print.f:4441: warning: 'accbstr' might be used uninitialized in this function
> print.f:4441: warning: 'dwnbstr' might be used uninitialized in this function
> print.f:4441: warning: 'pltbstr' might be used uninitialized in this function
> print.f:4442: warning: 'accmin' might be used uninitialized in this function
> print.f:4442: warning: 'dwnmin' might be used uninitialized in this function
> print.f:4442: warning: 'pltmin' might be used uninitialized in this function
> print.f:4443: warning: 'accmax' might be used uninitialized in this function
> print.f:4443: warning: 'dwnmax' might be used uninitialized in this function
> print.f:4443: warning: 'pltmax' might be used uninitialized in this function
> print.f:4444: warning: 'accstr' might be used uninitialized in this function
> print.f:4444: warning: 'dwnstr' might be used uninitialized in this function
> print.f:4444: warning: 'pltstr' might be used uninitialized in this function
> print.f: In subroutine `print_maprl':
> print.f:5169: warning: 'val' might be used uninitialized in this function
> print.f:5174: warning: 'accbase' might be used uninitialized in this function
> print.f:5174: warning: 'dwnbase' might be used uninitialized in this function
> print.f:5174: warning: 'pltbase' might be used uninitialized in this function
> print.f:5175: warning: 'accstep' might be used uninitialized in this function
> print.f:5175: warning: 'dwnstep' might be used uninitialized in this function
> print.f:5175: warning: 'pltstep' might be used uninitialized in this function
> print.f:5176: warning: 'accblo' might be used uninitialized in this function
> print.f:5176: warning: 'dwnblo' might be used uninitialized in this function
> print.f:5176: warning: 'pltblo' might be used uninitialized in this function
> print.f:5177: warning: 'accbhi' might be used uninitialized in this function
> print.f:5177: warning: 'dwnbhi' might be used uninitialized in this function
> print.f:5177: warning: 'pltbhi' might be used uninitialized in this function
> print.f:5178: warning: 'accbstr' might be used uninitialized in this function
> print.f:5178: warning: 'dwnbstr' might be used uninitialized in this function
> print.f:5178: warning: 'pltbstr' might be used uninitialized in this function
> print.f:5179: warning: 'accmin' might be used uninitialized in this function
> print.f:5179: warning: 'dwnmin' might be used uninitialized in this function
> print.f:5179: warning: 'pltmin' might be used uninitialized in this function
> print.f:5180: warning: 'accmax' might be used uninitialized in this function
> print.f:5180: warning: 'dwnmax' might be used uninitialized in this function
> print.f:5180: warning: 'pltmax' might be used uninitialized in this function
> print.f:5181: warning: 'accstr' might be used uninitialized in this function
> print.f:5181: warning: 'dwnstr' might be used uninitialized in this function
> print.f:5181: warning: 'pltstr' might be used uninitialized in this function
> cg2d.f: In subroutine `cg2d':
> In file included from cg2d.f:0:
> cg2d.f:1746: warning: 'rhsnorm' might be used uninitialized in this function
> ini_model_io.f: In subroutine `ini_model_io':
> In file included from ini_model_io.f:0:
> ini_model_io.f:2529: warning: unused variable 'np'
> ini_model_io.f:2529: warning: unused variable 'jg'
> ini_model_io.f:2529: warning: unused variable 'ig'
> ini_p_ground.f: In subroutine `ini_p_ground':
> In file included from ini_p_ground.f:0:
> ini_p_ground.f:2977: warning: 'dphvr' might be used uninitialized in this
> function
> ini_p_ground.f:2979: warning: 'recip_kappa__' might be used uninitialized in
> this function
> ini_p_ground.f:2980: warning: 'psnorm' might be used uninitialized in this
> function
> cc1: warning: -Wuninitialized is not supported without -O
> f771: warning: -Wuninitialized is not supported without -O
> the_model_main.f: In subroutine `the_model_main':
> In file included from the_model_main.f:0:
> the_model_main.f:2164: warning: unused variable 'exst'
> [hiphop at localhost build2]$
>
>
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
More information about the MITgcm-support
mailing list