[MITgcm-support] exp0 with non-constant bathymetry
Sergey Vinogradov
svinogra at aer.com
Tue Sep 13 15:52:49 EDT 2005
Matt, Samar:
Indeed, there is a problem with my Depth.data. I'm changing the hFacMin
to 0.1 (< shallowest bathymetry/layer thickness). However, if I put
hFacMin into data file (in PARM04 group ), it cannot digest it "namelist
read: read unexpected character". Can you change this parameter only in
a source code?
Thanks
Sergey
Matthew Mazloff wrote:
> Hi Sergey,
>
> If delZ=5000 then you have a single layer model. To have the single
> layer vary with depth you have to use partial cells. It sounds like
> partial cells are being used in your model but with a hfacmin and a
> hfacmindr that is smaller than you wish. You should either change
> these values or add more layers. Info on partial cells is in 2.10.7
> of the manual.
> http://mitgcm.org/pelican/online_documents/node49.html
>
> -Matt
>
>
>
> Sergey Vinogradov wrote:
>
>> Hi,
>>
>> I'm trying to modify exp0 (barotropic double gyre, flat bottom).
>> If I put spatially-varying bathymetry (a peace of realistic
>> seafloor), I get some places where elevation==0. This happens over
>> relatively shallow (but not too shallow) areas. My parameters are
>> delZ=5000., bathymetry varies between -764 and -5000m.
>> These two pictures show stdev of computed elevation/ bathymetry for
>> the default example and for the case with realistic topography.
>> I'd appreciate any hint on how to fix this problem,
>>
>> Regards,
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20050913/70ec7b1d/attachment.htm>
More information about the MITgcm-support
mailing list