[MITgcm-support] [MITgcm Manual] section 3.2 Obtaining the code

[Chris Hill]

Hi Sonya,

 Can you get an account set up so one of us can log in - or point us to
someone who can get an account set up. It sounds like either gmake is not
installed on the system or maybe its not in Uli's search path. Either way it
will be easier to figure this out if we can look.

Thanks,

Chris

> -----Original Message-----
> From: mitgcm-support-bounces at mitgcm.org 
> [mailto:mitgcm-support-bounces at mitgcm.org] On Behalf Of 
> Patrick Heimbach
> Sent: Thursday, June 17, 2004 11:50 PM
> To: Uli Riemenschneider
> Cc: mitgcm-support at mitgcm.org
> Subject: Re: [MITgcm-support] [MITgcm Manual] section 3.2 
> Obtaining the code
> 
> Hi Ulrike,
> 
> the best would be if one us could get access to your platform 
> to see what's wrong.
> We have been running the code on various o2k and o3k so it's 
> hopefully easy to fix on yours.
> 
> Also, could you send us exactly which commands you typed and 
> when/how it failed?
> 
> -Patrick
> 
> 
> 
> Quoting Uli Riemenschneider <uriemenschneider at whoi.edu>:
> 
> > Hi Ed,
> > 
> > I am still not able to compile the version of the MIT code I 
> > downloaded on Monday. Neither Sonya nor one of her postdocs 
> know what 
> > might be wrong (they might be using older versions of the 
> code). The 
> > machine I'd like to run it on is a 4 -processor SGI Origin 200.
> > 
> > Any other ideas how to get it going? Like I mentioned the command 
> > 'gmake' is not recognised by this machine.
> > Many thanks,
> > Uli
> > 
> > 
> > Ed Hill wrote:
> > 
> > >Hi Ulrike,
> > >
> > >I've subscribed you to the MITgcm-support email list and 
> below is the 
> > >follow-up message that was sent before you were subscribed.
> > >
> > >If "gmake" doesn't work, then please send more detailed 
> information 
> > >about your particular machine and compiler and we'll try 
> to help get 
> > >it working.
> > >
> > >Ed
> > >
> > >-----Forwarded Message-----
> > >  
> > >
> > >>From: Patrick Heimbach <heimbach at mit.edu>
> > >>To: mitgcm-support at mitgcm.org
> > >>Subject: Re: [MITgcm-support] [MITgcm Manual] section 3.2 
> Obtaining 
> > >>the
> > code
> > >>Date: Mon, 14 Jun 2004 15:22:12 -0400
> > >>
> > >>Hi Ulrike,
> > >>
> > >>chances are good that the error messages will go if you 
> type 'gmake' 
> > >>instead of 'make'
> > >>Let us know if that doesn't fix it.
> > >>
> > >>Cheers
> > >>-Patrick
> > >>    
> > >>
> > >
> > >  
> > >
> > 
> > --
> > *********************************************************
> > Ulrike Riemenschneider,  Postdoctoral Investigator Physical 
> > Oceanography Dept. MS #21 Woods Hole Oceanographic 
> Institution Woods 
> > Hole, MA 02543, USA
> > 
> > Phone: (+1) 508 289 2916
> > Fax: (+1) 508 457 2181
> > *********************************************************
> > 
> > 
> > 
> 
> 
> --------------------------------------------------------
> Patrick Heimbach   Massachusetts Institute of Technology
> FON: +1/617/253-5259                  EAPS, Room 54-1518
> FAX: +1/617/253-4464             77 Massachusetts Avenue
> mailto:heimbach at mit.edu               Cambridge MA 02139
> http://www.mit.edu/~heimbach/                        USA
> 
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-support
>