[MITgcm-support] stretched grid

Alistair Adcroft adcroft at MIT.EDU
Tue Apr 27 11:19:29 EDT 2004


It's fully implemented but you need to hack the grid initialization to not
use cube specific stuff...  i.e. 10 minutes work.

A.
--
Dr Alistair Adcroft            http://www.mit.edu/~adcroft
MIT Climate Modeling Initiative        tel: (617) 253-5938
EAPS 54-1523,  77 Massachusetts Ave,  Cambridge,  MA,  USA

-----Original Message-----
From: mitgcm-support-bounces at mitgcm.org
[mailto:mitgcm-support-bounces at mitgcm.org] On Behalf Of Patrick Heimbach
Sent: Tuesday, April 27, 2004 11:05 AM
To: mitgcm-support at mitgcm.org
Subject: RE: [MITgcm-support] stretched grid


Does that mean that, 
yes it's possible, but strictly,
it's not fully implemented?
-p.

Quoting Alistair Adcroft <adcroft at MIT.EDU>:

> Yes it is quite possible. The only thing the model does wrong is that
> it assumes we're on a cube grid when reading the curvilinear grid data 
> - I have fixed this in my own version but need to check/rectify it 
> with the latest cube stuff.
> 
> The grid generation needs to give point-to-point distances and surface
> areas for the four grids of model variables (T,U,V,Zeta) as defined in 
> GRID.h .
> 
> A.
> --
> Dr Alistair Adcroft            http://www.mit.edu/~adcroft
> MIT Climate Modeling Initiative        tel: (617) 253-5938
> EAPS 54-1523,  77 Massachusetts Ave,  Cambridge,  MA,  USA
> 
> -----Original Message-----
> From: mitgcm-support-bounces at mitgcm.org
> [mailto:mitgcm-support-bounces at mitgcm.org] On Behalf Of Patrick 
> Heimbach
> Sent: Monday, April 26, 2004 6:52 PM
> To: adcroft at MIT.EDU
> Cc: mitgcm-support at mitgcm.org
> Subject: [MITgcm-support] stretched grid
> 
> 
> Hi Alistair,
> 
> is it possible to run the model on a stretched
> orthogonal grid?
> 
> I reckon, it should be (fairly easy) as long as it
> is orthogonal, right?
> All that needs to be done should be to generate
> correct face cells that are then read by the model.
> Is there any documentation of what input the model needs
> (and which secret flags need to be set)?
> 
> Thanks
> -Patrick
> 
> _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
> Patrick Heimbach       Massachusetts Institute of Technology
> FON: +1/617/253-5259                      EAPS, Room 54-1518
> FAX: +1/617/253-4464                 77 Massachusetts Avenue
> mailto:heimbach at mit.edu                   Cambridge MA 02139
> http://www.mit.edu/~heimbach/                         U.S.A.
> 
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-support
> 
> 
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-support
> 


_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Patrick Heimbach       Massachusetts Institute of Technology
FON: +1/617/253-5259                      EAPS, Room 54-1518
FAX: +1/617/253-4464                 77 Massachusetts Avenue
mailto:heimbach at mit.edu                   Cambridge MA 02139
http://www.mit.edu/~heimbach/                         U.S.A.

_______________________________________________
MITgcm-support mailing list
MITgcm-support at mitgcm.org
http://dev.mitgcm.org/mailman/listinfo/mitgcm-support




More information about the MITgcm-support mailing list