[MITgcm-devel] RE: Higher order dissip on the cube

[Chris Hill]

Stuck in Dallas trying to get to Boulder at the moment, but I will try and
take a look if I can find a fast link - we should try bitkeepr sometime, I
think that would make it possible to downgrade in the air, on the sea or
wherever!

Chris  

> -----Original Message-----
> From: mitgcm-devel-bounces at mitgcm.org 
> [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Alistair Adcroft
> Sent: Sunday, February 08, 2004 2:01 PM
> To: MITgcm-devel at mitgcm.org
> Subject: RE: [MITgcm-devel] RE: Higher order dissip on the cube
> 
> C., Can you try down-grading the mon_stats*.F to Thursday - I 
> modified them on Friday.
> 
> A.
> --
> Dr Alistair Adcroft            http://www.mit.edu/~adcroft
> MIT Climate Modeling Initiative        tel: (617) 253-5938
> EAPS 54-1523,  77 Massachusetts Ave,  Cambridge,  MA,  USA
> 
> -----Original Message-----
> From: mitgcm-devel-bounces at mitgcm.org
> [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Chris Hill
> Sent: Sunday, February 08, 2004 2:42 PM
> To: MITgcm-devel at mitgcm.org
> Subject: RE: [MITgcm-devel] RE: Higher order dissip on the cube
> 
> 
> I get the monitor NAN's too on a checkout from yesterday and 
> running global_ocean.cs single process. I had thought it 
> might be something I had added locally so I was ignoring 
> them, but maybe it eas in the main branch I checked out. Note 
> - the model runs ok despite the monitor NAN's e.g.
> cg2d_init residuals are fine.
> 
> chris
> 
> > -----Original Message-----
> > From: mitgcm-devel-bounces at mitgcm.org 
> > [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of 
> Alistair Adcroft
> > Sent: Sunday, February 08, 2004 1:41 PM
> > To: MITgcm-devel at mitgcm.org
> > Subject: RE: [MITgcm-devel] RE: Higher order dissip on the cube
> > 
> > I recently "upgraded" the way that global_sum() is used in 
> > mon_stats_r*.F - it got past the verification experiments 
> so not sure 
> > what's going on? Try down grading mon_stats_*.F routines - maybe I 
> > messed up something that involves MPI?
> > 
> >    cvs update -D "5 days ago" pkg/monitor/mon_stats*.F
> > 
> > A.
> > --
> > Dr Alistair Adcroft            http://www.mit.edu/~adcroft
> > MIT Climate Modeling Initiative        tel: (617) 253-5938
> > EAPS 54-1523,  77 Massachusetts Ave,  Cambridge,  MA,  USA
> > 
> > -----Original Message-----
> > From: mitgcm-devel-bounces at mitgcm.org
> > [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Dimitris 
> > Menemenlis
> > Sent: Sunday, February 08, 2004 1:27 PM
> > To: Alistair Adcroft
> > Cc: mitgcm
> > Subject: RE: [MITgcm-devel] RE: Higher order dissip on the cube
> > 
> > 
> > Alistair, some good news with "non-slippery" coasts.
> > The hi-res cube integration has gotten past the 1996 Equatorial 
> > Pacific sea-mount blow-up with viscA4Grid=1e-3
> > 
> > Anyone knows what happened to the monitor routines?
> > When I test-report global_ocean.cs32x15, I get a bunch of NANs for 
> > mean and del2's and zeros for sd fields:
> > 
> > (PID.TID 0000.0001) %MON dynstat_eta_mean             =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_eta_sd               =
> > 0.0000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_eta_del2             =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_uvel_max             =
> > 1.8517049457442E-01
> > (PID.TID 0000.0001) %MON dynstat_uvel_min             =
> > -2.8835551845614E-01
> > (PID.TID 0000.0001) %MON dynstat_uvel_mean            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_uvel_sd              =
> > 0.0000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_uvel_del2            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_vvel_max             =
> > 1.7299533857874E-01
> > (PID.TID 0000.0001) %MON dynstat_vvel_min             =
> > -2.2520988227009E-01
> > (PID.TID 0000.0001) %MON dynstat_vvel_mean            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_vvel_sd              =
> > 0.0000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_vvel_del2            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_wvel_max             =
> > 1.0345009107981E-04
> > (PID.TID 0000.0001) %MON dynstat_wvel_min             =
> > -2.0499843500452E-04
> > (PID.TID 0000.0001) %MON dynstat_wvel_mean            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_wvel_sd              =
> > 0.0000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_wvel_del2            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_theta_max            =
> > 3.0924013283713E+01
> > (PID.TID 0000.0001) %MON dynstat_theta_min            =
> > -1.9000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_theta_mean           =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_theta_sd             =
> > 0.0000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_theta_del2           =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_salt_max             =
> > 4.1446610064801E+01
> > (PID.TID 0000.0001) %MON dynstat_salt_min             =
> > 1.8388095152689E+01
> > (PID.TID 0000.0001) %MON dynstat_salt_mean            =
> > NAN
> > (PID.TID 0000.0001) %MON dynstat_salt_sd              =
> > 0.0000000000000E+00
> > (PID.TID 0000.0001) %MON dynstat_salt_del2            =
> > NAN
> > 
> > 
> > 
> > --
> > Dimitris Menemenlis <menemenlis at jpl.nasa.gov> Jet Propulsion Lab, 
> > California Insitute of Technology MS 300-323, 4800 Oak Grove Dr, 
> > Pasadena CA 91109-8099
> > tel: 818-354-1656;  fax: 818-393-6720
> > 
> > _______________________________________________
> > MITgcm-devel mailing list
> > MITgcm-devel at mitgcm.org
> > http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> > 
> > _______________________________________________
> > MITgcm-devel mailing list
> > MITgcm-devel at mitgcm.org
> > http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> > 
> 
> _______________________________________________
> MITgcm-devel mailing list
> MITgcm-devel at mitgcm.org 
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> 
> _______________________________________________
> MITgcm-devel mailing list
> MITgcm-devel at mitgcm.org
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
>