[MITgcm-support] Can not run a regional model for long time
Sabri MUTLU (MAM-ÇTÜE)
sabri.mutlu at tubitak.gov.tr
Sun Sep 18 14:55:02 EDT 2022
Hi Matt,
Max. U velocity at the boundary becomes higher than 1 m/sec, and also the current very close to the boundary reaches unrealistic speeds.
But do not know why, since it happens after 8 days in the simulation.
obc_W_uVel_max value always increases with time. Maybe this is the problem. If it is, how to solve it?
Best.
Sabri
Kimden: "Matthew Mazloff" <mmazloff at ucsd.edu>
Kime: "mitgcm-support" <mitgcm-support at mitgcm.org>
Gönderilenler: 18 Eylül Pazar 2022 19:16:57
Konu: Re: [MITgcm-support] Can not run a regional model for long time
You need to find out why it is becoming unstable. Have a look at the solution and see if you can see where and why it is blowing up.
Matt
On Sep 18, 2022, at 6:08 AM, Sabri MUTLU (MAM-ÇTÜE) < [ mailto:sabri.mutlu at tubitak.gov.tr | sabri.mutlu at tubitak.gov.tr ] > wrote:
Hi all,
As a newbie in this field, I need help for the following problem, which I have been trying to deal with for a long time.
I built a regional model for my thesis study. When I try to run it for 12 or more days, it gives "NaN" values after 8 or 9 days later in the model.
Could you please examine the following model configuration and give me an idea for possible solution?
(I had to choose Orlanski method since don't have any boundary condition to feed the model.)
Thank you in advance.
Sabri
&PARM01
viscAh=2.E-2,
viscAz=1.5E-5,
no_slip_sides=.TRUE.,
no_slip_bottom=.TRUE.,
diffKhT=2.E-2,
diffKhS=2.E-2,
diffKzT=2.E-5,
diffKzS=2.E-5,
f0=0.948E-4,
implicitFreeSurface=.TRUE.,
exactConserv=.TRUE.,
implicitDiffusion=.TRUE.,
implicitViscosity=.TRUE.,
eosType = 'JMD95Z',
tRef=22.2803,22.3383,22.3646,22.4220,22.5469,22.5081,21.0406,19.6075,18.3619,16.7902,15.8310,15.4016,15.3625,15.3935,15.4334,15.4465,15.4508,15.4710,15.5226,
15.5428,15.5485,15.5589,15.5829,15.5860,15.5859,15.5767,15.5572,15.5477,15.5357,15.5068,15.4782,15.4640,15.4337,15.3816,15.3480,15.2998,15.2423,15.2127,
15.1271,15.0639,15.0086,14.9722,14.9229,14.8937,14.8470,14.8073,14.7838,14.7677,14.7392,14.7210,14.7037,14.7036,14.7035,14.7034,14.7033,
sRef=24.3775,24.4042,24.4730,24.5782,24.7042,24.8407,25.8279,26.4026,28.0163,30.1542,31.7531,33.9951,37.0132,37.5629,37.8303,37.9592,38.0011,38.1433,38.2744,
38.3184,38.3548,38.4269,38.5535,38.6043,38.6738,38.7411,38.7479,38.7496,38.7510,38.7512,38.7469,38.7529,38.7569,38.7644,38.7666,38.7683,38.7698,38.7696,
38.7635,38.7563,38.7513,38.7476,38.7427,38.7399,38.7354,38.7326,38.7305,38.7280,38.7254,38.7236,38.7220,38.7220,38.7220,38.7220,38.7220,
staggerTimeStep = .TRUE.,
tempAdvScheme = 33,
saltAdvScheme = 33,
useSingleCpuIO=.TRUE.,
bottomDragQuadratic = 0.02,
select_rStar = 0,
&
&PARM02
cg2dMaxIters=300,
cg2dTargetResidual=1.E-13,
cg3dMaxIters=20,
cg3dTargetResidual=1.E-8,
&
---------
&PARM03
startTime = 0.,
endTime = 1036800.,
deltaT=5,
dumpFreq=10800.,
monitorFreq=3600.,
monitorSelect=2,
periodicExternalForcing=.TRUE.,
externForcingPeriod=10800.,
externForcingCycle=1036800.,
&
&PARM04
usingSphericalPolarGrid=.TRUE.,
delz = 32*2,22*8,10,
delX = 528*0.0013,
delY = 164*0.001,
ygOrigin=40.656,
xgOrigin=29.2612,
&
&PARM05
bathyFile='bathy_v6_528-164.bin',
zonalWindFile='windU_2309-0510.bin',
meridWindFile='windV_2309-0510.bin',
&
# Open-boundaries
&OBCS_PARM01
OB_Iwest=164*1,
useOrlanskiWest=.TRUE.,
useOBCSbalance=.TRUE.,
useOBCSsponge=.FALSE.,
OBCS_balanceFacW = -1.,
&
# Packages
&PACKAGES
useOBCS=.TRUE.,
useKPP =.TRUE.,
&
_______________________________________________
MITgcm-support mailing list
[ mailto:MITgcm-support at mitgcm.org | MITgcm-support at mitgcm.org ]
https://urldefense.com/v3/__http://mailman.mitgcm.org/mailman/listinfo/mitgcm-support__;!!Mih3wA!FESXL3f13-HEtS0Gpg-VY86MgAy-PM4Ai4Q1CWC9SWho-hAR-5s2KHK44htyZaLDvWLlzjo3dQZ2mwDVIV5cfG84t0U2dw$
_______________________________________________
MITgcm-support mailing list
MITgcm-support at mitgcm.org
http://mailman.mitgcm.org/mailman/listinfo/mitgcm-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.mitgcm.org/pipermail/mitgcm-support/attachments/20220918/e03b91ad/attachment-0001.html>
More information about the MITgcm-support
mailing list