[MITgcm-support] Problem with cal_fulldate

Ying Ye Ying.Ye at awi.de
Wed Sep 24 05:48:02 EDT 2014


Hi Jean-Michel,

the call of the cal subroutines is now moved from recom_readparms.F to 
recom_init_fixed.F. And it works.
Thank you very much.

Cheers,
Ying


Am 22/09/14 um 17:49 schrieb Jean-Michel Campin:
> Hi Ying,
>
> There have benn some changes in pkg/cal since checkpoint62v,
> and specially pkg/cal setting (call to CAL_SET) has been moved,
> in April 2012, from cal_readparms.F to cal_init_fixed.F (called at
> the top of model/src/packages_init_fixed.F). And in order to make
> this change safe, a STOP has been added to cal_fulldate.F
> in case you try to use some pkg/cal variables that have not yet been set
> (and I belive you are in this type of situation).
>
> I would suggest to check in your RecoM pkg for early call to
> any pkg/cal subroutines, and in particular in recom_readparams.F
> (or equivalent). These calls will have to be move later in the call
> sequence, for instance in recom_init_fixed.F (or equivalent).
>
> Cheers,
> Jean-Michel
>
> On Mon, Sep 22, 2014 at 10:05:59AM +0200, Ying Ye wrote:
>> Dear all,
>>
>> I have updated my MITgcm from the version with the checkpoint 62v to
>> 65c. As I started a test run with a package for our ecosystem model
>> (RecoM, which worked well on the old version of MITgcm), I got the
>> following error in STDERR file:
>>
>> (PID.TID 0000.0001) *** ERROR *** CAL_FULLDATE: yymmdd=    10115 ,
>> hhmmss=        0
>> (PID.TID 0000.0001) *** ERROR *** CAL_FULLDATE: called too early
>> (cal_setStatus= 0 )
>>
>> And the output file as the job was brocken shows nothing more than
>> this information:
>>
>> Check F_SYSLEN: 1024
>> /localtmp/tmp.0:2498.sx8-siox
>> Tue Sep 16 10:35:18 DST 2014
>>   STOP ABNORMAL END: S/R CAL_FULLDATE
>>
>>
>>       ******  Program Information  ******
>>    Real Time (sec)       :          0.218295
>>    User Time (sec)       :          0.121446
>>    Sys  Time (sec)       :          0.055556
>>    Vector Time (sec)     :          0.002825
>>    Inst. Count           :          37899144.
>>    V. Inst. Count        :             74878.
>>    V. Element Count      :          10551639.
>>    FLOP Count            :             41196.
>>    MOPS                  :        398.331806
>>    MFLOPS                :          0.339212
>>    VLEN                  :        140.917746
>>    V. Op. Ratio (%)      :         21.811766
>>   STOP ABNORMAL END: S/R CAL_FULLDATE
>>    Memory Size (MB)      :        736.031250
>>    MIPS                  :        312.065159
>>    I-Cache (sec)         :          0.028743
>>    O-Cache (sec)         :          0.009910
>>    Bank (sec)            :          0.018754
>>
>>
>>
>>    Start Time (date)  :  2014/09/16 10:35:18
>>    End   Time (date)  :  2014/09/16 10:35:19
>>       ******  Program Information  ******
>>   STOP ABNORMAL END: S/R CAL_FULLDATE
>> ./mitgcmuv(lang:f90): signal trap(SIGTERM: Software termination)
>> ./mitgcmuv(lang:f90): signal trap(SIGTERM: Software termination)
>> sx8-7: mpid: MPI process (universe = 0, rank = 1) terminated by exit(1)
>> MPI process (universe = 0, rank = 2) terminated by exit(1)
>> Tue Sep 16 10:35:24 DST 2014
>> No match.
>> No match.
>>
>> Did anybody have a similar problem by updating? I saw a change with
>> repect to cal_fulldate in tag-index on the checkpoint 63m. Schould I
>> do any corresponding changes to the call of cal_fulldate in the
>> ecosystem model package?
>>
>> Many thanks.
>>
>> Best regards,
>> Ying
>>
>> _______________________________________________
>> MITgcm-support mailing list
>> MITgcm-support at mitgcm.org
>> http://mitgcm.org/mailman/listinfo/mitgcm-support
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support




More information about the MITgcm-support mailing list