[MITgcm-support] Namelist Error with RBCS and multiple tracers

Hauke Blanken, Mr hauke.blanken at mail.mcgill.ca
Tue Jun 17 00:23:54 EDT 2014


Thank you very much for your help everyone!

I looked in rbcs_readparms.f and it turns out that just changing maskLEN to 13 in RBCS.h wasn’t enough, as Alexander suggested it needed to be changed in RBCS_SIZE.h as well to take effect.

Thanks again,
Hauke

Hauke Blanken
M.Eng. (Thesis) Candidate
Department of Civil Engineering and Applied Mechanics
McGill University
Phone: 778-871-3431

From: Alexander Slavin <aslavin at mun.ca<mailto:aslavin at mun.ca>>
Reply-To: "mitgcm-support at mitgcm.org<mailto:mitgcm-support at mitgcm.org>" <mitgcm-support at mitgcm.org<mailto:mitgcm-support at mitgcm.org>>
Date: Monday, June 16, 2014 at 11:45 AM
To: "mitgcm-support at mitgcm.org<mailto:mitgcm-support at mitgcm.org>" <mitgcm-support at mitgcm.org<mailto:mitgcm-support at mitgcm.org>>
Subject: Re: [MITgcm-support] Namelist Error with RBCS and multiple tracers

Hello Hauke,

You should fix RBCS_SIZE.h to appropriate number of masks and recompile.

Cheers,
Alexander Slavin


On 15/06/2014 6:08 PM, Hauke Blanken, Mr wrote:
Hi Everyone,

I’m currently modelling a problem with 11 sources of passive tracer in my domain and am running into a namelist error (exit code 19), which I think is quite likely an easy fix, however I haven’t been able to solve it, being quite new to MITgcm.

I’ve compiled the code for 11 tracers and 13 mask files and am using the RBCS package to restore the tracer field to it’s original value at each time step. I tested this setup using only one tracer and it worked fine. To add the remaining tracers I re-compiled, changing PTRACERS_num to 11 in PTRACERS_SIZE.h and maskLEN to 13 in RBCS.h, and modified the data.ptracers and data.rbcs files to add links to the appropriate tracer, mask and relaxation files. I’ve attached my data.ptracers, data.rbcs, error log and a sample STDOUT file (STDERR is empty). The error log and STDOUT seem to indicate that the error is in data.rbcs, though STDOUT terminates on data.rbcs on some time steps and data.ptracers on others. If anyone has insight on what might be happening here it would be hugely appreciated. And if there is other info that would be helpful in diagnosing the problem I’m more than happy to provide it.

Thanks in advance,
Hauke

Hauke Blanken
M.Eng. (Thesis) Candidate
Department of Civil Engineering and Applied Mechanics
McGill University
Phone: 778-871-3431



_______________________________________________
MITgcm-support mailing list
MITgcm-support at mitgcm.org<mailto:MITgcm-support at mitgcm.org>http://mitgcm.org/mailman/listinfo/mitgcm-support

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20140617/faad3d09/attachment.htm>


More information about the MITgcm-support mailing list