[MITgcm-support] Query regarding "exf package".
himansu pradhan
oceancalling at gmail.com
Sat Dec 31 08:24:43 EST 2011
A advance Happy New Year 2012 to all here,.
Thank U Dimitris sir,
I have fixed the problem...... i didnot have enough times slabs for wind
stress files.
Thank U...
On Thu, Dec 29, 2011 at 8:59 PM, Menemenlis, Dimitris (3248) <
Dimitris.Menemenlis at jpl.nasa.gov> wrote:
> Himansu, based on startdate in data.cal,
> make sure that there are forcing records available for your
> first integration time step.
>
> Specifically, based on data.exf below, your startdate in
> data.cal has to be on or after
> startdate1=20110101,
> startdate2=000000,
>
> Also make sure that your initial temperature and salinity
> files are consistent with your model bathymetry.
>
> Good luck
>
> Dimitris Menemenlis
>
> On Dec 29, 2011, at 5:06 AM, himansu pradhan wrote:
>
> > Hi MITGcm users,
> >
> > I have been trying to use "exf package ". To be in detail : I was using
> "winds stress files" in "data". Now i want to use this "wind stress files"
> in in "data.exf" . My "data.exf" looks like this:
> > #........................data.exf........................
> > # External Forcing Data
> > # *********************
> > &EXF_NML_01
> > exf_iprec = 64,
> > readstressOnCgrid=.TRUE.,
> > &
> > &EXF_NML_02
> > ustressstartdate1=20110101,
> > ustressstartdate2=000000,
> > ustressperiod=21600,
> > #
> > vstressstartdate1=20110101,
> > vstressstartdate2=000000,
> > vstressperiod=21600,
> > #
> > ustressfile = 'pUstress.bin',
> > vstressfile = 'pVstress.bin',
> > #
> > &
> > ....................................
> > and "data" file's "PARM03" and "PARM05" looks like :
> > ....data..........
> > &PARM03
> > startTime=0,
> > endTime=21600,
> > deltaT=10.0,
> > abEps=0.1,
> > pChkptFreq=21600,
> > dumpFreq=3600,
> > # for time dependent open boundary conditions, activate the following 3
> lines:
> > # periodicExternalForcing=.TRUE.,
> > # externForcingPeriod=10800.,
> > # externForcingCycle =43200.,
> > &
> > # Input datasets
> > &PARM05
> > bathyFile='top_MOD.bin',
> > hydrogThetaFile='15lvlT_may.bin',
> > hydrogSaltFile='15lvlS_may.bin',
> > # zonalWindFile='pUstress.bin',
> > # meridWindFile='pVstress.bin',
> > &
> > ........................
> > I get the following error : ???????????????????/
> > [SVBabu at SVBabu input]$ ./mitgcmuv > 29dec1
> > ** WARNINGS ** INI_THETA: found 32 wet grid-pts with theta=0
> identically.
> > ** WARNINGS ** INI_SALT: found 3999 wet grid-pts with salt=0
> identically.
> > At line 2158 of file mdsio_read_field.f (unit = 9, file = 'pUstress.bin')
> > Fortran runtime error: Non-existing record number
> > ??????????????
> >
> > to note further : i use the same u/v -stress files in the "data.exf".
> And my stress files are of single time slab. The model runs fine when these
> stress files are used in "data". my data files are of precession : real 8 .
> here is the matlab prog :
> > % creating BInary file 4m TExt file
> > ieee='b';accuracy='real*8';
> > u = importdata('Wu2D.txt');
> > W1 = -1* ((1.225)*(0.0012)*(u.*u));
> > fid=fopen('pUstress.bin','wb',ieee);fwrite(fid,W1',accuracy);fclose(fid);
> >
> > Any suggestations/help
> >
> > Thanking you in advance,
> >
> > Himansu kesari pradhan
> > India.
> >
> > _______________________________________________
> > MITgcm-support mailing list
> > MITgcm-support at mitgcm.org
> > http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20111231/b4e32841/attachment.htm>
More information about the MITgcm-support
mailing list