[MITgcm-support] a quick compile question
Yuan Lian
lian at ashimaresearch.com
Thu Jul 15 06:06:46 EDT 2010
Jens-Olaf and Oliver's suggestions make sense.
First check Makefile and see if initialise_varia.f has all required macros.
The missing macros could be caused by "mkdepend".
If the dependencies are all there, then Check initialise_varia.f before
you compile it to make sure _EXCH_XYZ_R8 has been replaced by
CALL EXCH_XYZ_R8 (open initialise_varia.f in editor and search for
EXCH_XYZ_R8). If _EXCH_XYZ_R8 is not converted correctly then there is
problem with cpp and its defines.
Yuan
On 7/15/10 1:35 AM, q li wrote:
> Hi Jens-Olaf, Oliver and Yuan,
> Thanks for the suggestions. I am not familar with cpp. I still don't
> know how to fix it. I "think" I have had all options for cpp. _EXCH
> _EXCH_XYZ_R8 should be converted to CALL EXCH _EXCH_XYZ_R8, I guess.
> Li
> Here is the cpp & mpif77 command
> cat initialise_varia.F |
> /data2/home/hiphop/MITgcm/tools/set64bitConst.sh | cpp -traditional
> -P -DALLOW_USE_MPI -DALWAYS_USE_MPI -D_BYTESWAPIO -DWORDLENGTH=4
> -DALLOW_USE_MPI -DALWAYS_USE_MPI -DHAVE_SYSTEM -DHAVE_FDATE
> -DHAVE_ETIME -DHAVE_CLOC -DHAVE_SETRLSTK -DHAVE_SIGREG -DHAVE_STAT
> -I/usr/include -I/data2/home/hiphop/local/mpich-intel/include
> -I/data2/software/intel/fce/9.1.040/include > initialise_varia.f
> mpif77 -132 -r8 -i4 -w95 -W0 -WB -convert big_endian -assume
> byterecl -O3 -fp -align -c initialise_varia.f
> fortcom: Error: initialise_varia.f, line 2202: Syntax error, found
> END-OF-STATEMENT when expecting one of: => = . ( %
> _EXCH_XYZ_R8(wVel,myThid)
> -------------------------------^
> compilation aborted for initialise_varia.f (code 1)
> make: *** [initialise_varia.o] Error 1
>
> ------------------------------------------------------------------------
> *From:* Jens-Olaf Beismann <jbeismann at hpce.nec.com>
> *To:* "mitgcm-support at mitgcm.org" <mitgcm-support at mitgcm.org>
> *Sent:* Thu, July 15, 2010 3:10:57 AM
> *Subject:* Re: [MITgcm-support] a quick compile question
>
> Li,
>
> > mpif77 -132 -r8 -i4 -w95 -W0 -WB -O3 -fp -align -c initialise_varia.f
> > fortcom: Error: initialise_varia.f, line 2202: Syntax error,
> > found END-OF-STATEMENT when expecting one of: => = . ( %
> > _EXCH_XYZ_R8(wVel,myThid)
> > -------------------------------^
> > compilation aborted for initialise_varia.f (code 1)
> > make: *** [initialise_varia.o] Error 1
> >
> > Here is the line 2202:
> >
> > 2201 C-- Fill in overlap regions for wVel :
> > 2202 _EXCH_XYZ_R8(wVel,myThid)
> > 2203 C-- Finally summarise the model state
> > 2204 IF (debugMode) CALL DEBUG_CALL('STATE_SUMMARY',myThid)
> > 2205 CALL STATE_SUMMARY( myThid )
>
> as Oliver already mentioned this has nothing to do with the compiler
> or MPI library you're using. For some reason the preprocessor (cpp)
> did not replace _EXCH_XYZ_R8 with the appropriate subroutine call.
>
> Please make sure that the preprocessing step is successful. If I
> remember correctly, *.f files are generated from the corresponding *.F
> in a separate step in the MITgcm make process. From the stdout/stderr
> you should be able to check the cpp command for any missing
> options/defines. You can re-run just the cpp command interactively to
> find out what is needed for the correct expansion of this macro.
>
> Cheers,
>
> Jens-Olaf
> ---
> Dr. Jens-Olaf Beismann Senior Benchmarking Analyst
> High Performance Computing NEC Deutschland GmbH
> Tel: +49 431 2372063 (office) +49 160 1835289 (mobile)
> Fax: +49 431 2372170 www.nec.com/de/prod/servers/hpc/
> <http://www.nec.com/de/prod/servers/hpc/>
> ---
> NEC Deutschland GmbH, Hansaallee 101, D-40549 Düsseldorf
> Geschäftsführer: Richard Hanscott
> Handelsregister Düsseldorf, HRB 57941, VAT ID DE129424743
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org <mailto:MITgcm-support at mitgcm.org>
> http://mitgcm.org/mailman/listinfo/mitgcm-support
>
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20100715/7c586e32/attachment.htm>
More information about the MITgcm-support
mailing list