[MITgcm-support] output using diagnostics package
q li
qliuri at yahoo.com
Thu Jul 30 16:04:51 EDT 2009
Hi Jean-Michel,
I can only output 2 stat files. If I remove stat_fields(1,3) and stat_fields(1,4) from data.diagnostics, it worked fine. But when I add them, an error appears:
forrtl: severe (104): incorrect STATUS= specifier value for connected file, unit 11, file ~/MITgcm/diagn/runEWH/statA3.0000000000.txt
I set 5 different points in the model domain in Matlab.
nx=2^12; ny=1; nz=300;
regMask=zeros(nx,ny,nz);
regMask(xA1,1,:)=1; regMask(xA2,1,:)=2; regMask(xA3,1,:)=3;
regMask(xP1,1,:)=4; regMask(xP2,1,:)=5;
And here is my data.diagnostics:
&DIAG_STATIS_PARMS
#- regional mask: 3 lat. band: 1 : y <= -24 ; 2 : -24<y<24 ; 3 : 24 <= y
diagSt_regMaskFile='regMask.bin',
nSetRegMskFile=1,
set_regMask(1)= 1, 1, 1, 1, 1, 1,
val_regMask(1)= 0.,1., 2., 3., 4., 5.,
#---
stat_fields(1,1)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
stat_fname(1)= 'statA1',
stat_region(1,1)= 1,
stat_freq(1)= -60.,
stat_phase(1)= 0.,
stat_fields(1,2)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
stat_fname(2)= 'statA2',
stat_region(1,2)= 2,
stat_freq(2)= -60.,
stat_phase(2)= 0.,
stat_fields(1,3)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
stat_fname(3)= 'statA3',
stat_region(1,3)= 3,
stat_freq(3)= -60.,
stat_phase(3)= 0.,
stat_fields(1,4)= 'ETAN ','UVEL ','VVEL ','WVEL ', 'THETA ',
stat_fname(4)= 'statP1',
stat_region(1,4)= 4,
stat_freq(4)= -60.,
stat_phase(4)= 0.,
&
Do you have any idea what is happening?
Best,
Li
________________________________
From: Jean-Michel Campin <jmc at ocean.mit.edu>
To: mitgcm-support at mitgcm.org
Sent: Wednesday, July 29, 2009 4:34:32 PM
Subject: Re: [MITgcm-support] output using diagnostics package
Hi Li,
Fortran Unit 11 is used to read parameter files (all the data*).
Looks like the namelist termination (for the 1rst namelist:
DIAGNOSTICS_LIST) is missing in file "data.diagnostics".
> I don't quite understand three parameters in data.diagnostics: nSetRegMskFile,
> set_regMask and val_regMask. Could anyone help me out?
You can find few emails (in Apr 2009) on the support list about
Regional statistics diag (regon-mask).
And an example in MITgcm/verification/aim.5l_cs/input.thSI
with matlab script (mk3regions_mask.m) to generate the region-mask file.
Cheers,
Jean-Michel
On Wed, Jul 29, 2009 at 09:50:47AM -0700, q li wrote:
> Experts,
>
> I am trying to output only UVEL and THETA for the whole domain (2D model) every hour, and also UVEL and THETA for 4 locations every 1 minute in order to compare to observations. Thank Jean-Michel for telling me the diagnostics package was designed for it. I got following error information from the server. I don't know why and I cannot find any help file for it either. Is anything wrong with my diagnostics.size file? I don't quite understand three parameters in data.diagnostics: nSetRegMskFile, set_regMask and val_regMask. Could anyone help me out?
>
> Best,
>
> Li
>
> Error output from the server: (MPI run on 32 cpus)
>
> ~/MITgcm/SCS/diagn/run> more *.err
> forrtl: severe (24): end-of-file during read, unit 11, file /tmp/pbs.16613.a330/fortZROgSu, line 18, position 0
> Image PC Routine Line Source
> mitgcmuv 4000000000439F50 Unknown Unknown Unknown
> mitgcmuv 4000000000437A60 Unknown Unknown Unknown
> mitgcmuv 4000000000391D10 Unknown Unknown Unknown
> mitgcmuv 40000000002FBA10 Unknown Unknown Unknown
> mitgcmuv 40000000002FA9A0 Unknown Unknown Unknown
> mitgcmuv 4000000000339400 Unknown Unknown Unknown
> mitgcmuv 400000000003EC60 Unknown Unknown Unknown
> mitgcmuv 40000000002C3B10 Unknown Unknown Unknown
> mitgcmuv 40000000002B0DA0 Unknown Unknown Unknown
> mitgcmuv 40000000002E3590 Unknown Unknown Unknown
> mitgcmuv 4000000000204F50 Unknown Unknown Unknown
> mitgcmuv 4000000000003ED0 Unknown Unknown Unknown
> libc.so.6.1 2000000003BB1C50 Unknown Unknown Unknown
> mitgcmuv 4000000000003CC0 Unknown Unknown Unknown
> forrtl: severe (24): end-of-file during read, unit 11, file /tmp/pbs.16613.a330/fortC73lfs, line 18, position 0
> Image PC Routine Line Source
> mitgcmuv 4000000000439F50 Unknown Unknown Unknown
> mitgcmuv 4000000000437A60 Unknown Unknown Unknown
> mitgcmuv 4000000000391D10 Unknown Unknown Unknown
> mitgcmuv 40000000002FBA10 Unknown Unknown Unknown
> mitgcmuv 40000000002FA9A0 Unknown Unknown Unknown
> mitgcmuv 4000000000339400 Unknown Unknown Unknown
> mitgcmuv 400000000003EC60 Unknown Unknown Unknown
> mitgcmuv 40000000002C3B10 Unknown Unknown Unknown
> mitgcmuv 40000000002B0DA0 Unknown Unknown Unknown
> mitgcmuv 40000000002E3590 Unknown Unknown Unknown
> mitgcmuv 4000000000204F50 Unknown Unknown Unknown
> mitgcmuv 4000000000003ED0 Unknown Unknown Unknown
> libc.so.6.1 2000000003BB1C50 Unknown Unknown Unknown
> mitgcmuv 4000000000003CC0 Unknown Unknown Unknown
> forrtl: severe (24): end-of-file during read, unit 11, file /tmp/pbs.16613.a330/fortu2M8R0, line 18, position 0
> Image PC Routine Line Source
> mitgcmuv 4000000000439F50 Unknown Unknown Unknown
> mitgcmuv 4000000000437A60 Unknown Unknown Unknown
> mitgcmuv 4000000000391D10 Unknown Unknown Unknown
> mitgcmuv 40000000002FBA10 Unknown Unknown Unknown
> mitgcmuv 40000000002FA9A0 Unknown Unknown Unknown
> mitgcmuv 4000000000339400 Unknown Unknown Unknown
> mitgcmuv 400000000003EC60 Unknown Unknown Unknown
> mitgcmuv 40000000002C3B10 Unknown Unknown Unknown
> mitgcmuv 40000000002B0DA0 Unknown Unknown Unknown
> mitgcmuv 40000000002E3590 Unknown Unknown Unknown
> mitgcmuv 4000000000204F50 Unknown Unknown Unknown
> mitgcmuv 4000000000003ED0 Unknown Unknown Unknown
> libc.so.6.1 2000000003BB1C50 Unknown Unknown Unknown
> mitgcmuv 4000000000003CC0 Unknown Unknown Unknown
> forrtl: severe (24): end-of-file during read, unit 11, file /tmp/pbs.16613.a330/fortIhTnQJ, line 18, position 0
> Image PC Routine Line Source
> mitgcmuv 4000000000439F50 Unknown Unknown Unknown
> mitgcmuv 4000000000437A60 Unknown Unknown Unknown
> mitgcmuv 4000000000391D10 Unknown Unknown Unknown
> mitgcmuv 40000000002FBA10 Unknown Unknown Unknown
> mitgcmuv 40000000002FA9A0 Unknown Unknown Unknown
> mitgcmuv 4000000000339400 Unknown Unknown Unknown
> mitgcmuv 400000000003EC60 Unknown Unknown Unknown
> mitgcmuv 40000000002C3B10 Unknown Unknown Unknown
> mitgcmuv 40000000002B0DA0 Unknown Unknown Unknown
> mitgcmuv 40000000002E3590 Unknown Unknown Unknown
> mitgcmuv 4000000000204F50 Unknown Unknown Unknown
> mitgcmuv 4000000000003ED0 Unknown Unknown Unknown
> libc.so.6.1 2000000003BB1C50 Unknown Unknown Unknown
> mitgcmuv 4000000000003CC0 Unknown Unknown Unknown
> forrtl: severe (24): end-of-file during read, unit 11, file /tmp/pbs.16613.a330/fortyjeMpE, line 18, position 0
> Image PC Routine Line Source
> mitgcmuv 4000000000439F50 Unknown Unknown Unknown
> mitgcmuv 4000000000437A60 Unknown Unknown Unknown
> mitgcmuv 4000000000391D10 Unknown Unknown Unknown
> mitgcmuv 40000000002FBA10 Unknown Unknown Unknown
> mitgcmuv 40000000002FA9A0 Unknown Unknown Unknown
> mitgcmuv 4000000000339400 Unknown Unknown Unknown
> mitgcmuv 400000000003EC60 Unknown Unknown Unknown
> mitgcmuv 40000000002C3B10 Unknown Unknown Unknown
> mitgcmuv 40000000002B0DA0 Unknown Unknown Unknown
> mitgcmuv 40000000002E3590 Unknown Unknown Unknown
> mitgcmuv 4000000000204F50 Unknown Unknown Unknown
> mitgcmuv 4000000000003ED0 Unknown Unknown Unknown
> libc.so.6.1 2000000003BB1C50 Unknown Unknown Unknown
> mitgcmuv 4000000000003CC0 Unknown Unknown Unknown
> MPI: MPI_COMM_WORLD rank 21 has terminated without calling MPI_Finalize()
> MPI: aborting job
>
>
>
> setup in data.dignostics:
>
>
> (PID.TID 0000.0001) DIAGNOSTICS_READPARMS: opening data.diagnostics
> (PID.TID 0000.0001) OPEN_COPY_DATA_FILE: opening file data.diagnostics
> (PID.TID 0000.0001) // =======================================================
> (PID.TID 0000.0001) // Parameter file "data.diagnostics"
> (PID.TID 0000.0001) // =======================================================
> (PID.TID 0000.0001) ># Diagnostic Package Choices
> (PID.TID 0000.0001) >#-----------------
> (PID.TID 0000.0001) ># for each output-stream:
> (PID.TID 0000.0001) ># filename(n) : prefix of the output file name (only 8.c long) for outp.stream n
> (PID.TID 0000.0001) ># frequency(n):< 0 : write snap-shot output every |frequency| seconds
> (PID.TID 0000.0001) ># > 0 : write time-average output every frequency seconds
> (PID.TID 0000.0001) ># timePhase(n) : write at time = timePhase + multiple of |frequency|
> (PID.TID 0000.0001) ># averagingFreq(n) : frequency (in s) for periodic averaging interval
> (PID.TID 0000.0001) ># averagingPhase(n): phase (in s) for periodic averaging interval
> (PID.TID 0000.0001) ># repeatCycle(n) : number of averaging intervals in 1 cycle
> (PID.TID 0000.0001) ># levels(:,n) : list of levels to write to file (Notes: declared as REAL)
> (PID.TID 0000.0001) ># when this entry is missing, select all common levels of this list
> (PID.TID 0000.0001) ># fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics.log"
> (PID.TID 0000.0001) ># file for the list of all available diag. in this particular config)
> (PID.TID 0000.0001) >#-----------------
> (PID.TID 0000.0001) > &DIAGNOSTICS_LIST
> (PID.TID 0000.0001) ># diag_mnc = .FALSE.,
> (PID.TID 0000.0001) ># dumpAtLast = .TRUE.,
> (PID.TID 0000.0001) > fields(1,1) = 'UVEL ','THETA ',
> (PID.TID 0000.0001) > filename(1) = 'UT',
> (PID.TID 0000.0001) > frequency(1) = -10800.0D+0,
> (PID.TID 0000.0001) >
> (PID.TID 0000.0001) >
> (PID.TID 0000.0001) ># Parameter for Diagnostics of per level statistics:
> (PID.TID 0000.0001) >#-----------------
> (PID.TID 0000.0001) ># for each output-stream:
> (PID.TID 0000.0001) ># stat_fname(n) : prefix of the output file name (only 8.c long) for outp.stream n
> (PID.TID 0000.0001) ># stat_freq(n):< 0 : write snap-shot output every |stat_freq| seconds
> (PID.TID 0000.0001) ># > 0 : write time-average output every stat_freq seconds
> (PID.TID 0000.0001) ># stat_phase(n) : write at time = stat_phase + multiple of |stat_freq|
> (PID.TID 0000.0001) ># stat_region(:,n) : list of "regions" (default: 1 region only=global)
> (PID.TID 0000.0001) ># stat_fields(:,n) : list of diagnostics fields (8.c) (see "available_diagnostics.log"
> (PID.TID 0000.0001) ># file for the list of all available diag. in this particular config)
> (PID.TID 0000.0001) >#-----------------
> (PID.TID 0000.0001) > &DIAG_STATIS_PARMS
> (PID.TID 0000.0001) > diagSt_regMaskFile='regMask.bin',
> (PID.TID 0000.0001) > nSetRegMskFile=1,
> (PID.TID 0000.0001) > set_regMask(1)= 1, 1, 1,
> (PID.TID 0000.0001) > val_regMask(1)= 1., 2., 3.,
> (PID.TID 0000.0001) >#---
> (PID.TID 0000.0001) > stat_fields(1,1)= 'UVEL ','THETA ',
> (PID.TID 0000.0001) > stat_fname(1)= 'dynStDiag',
> (PID.TID 0000.0001) > stat_freq(1)= -600.,
> (PID.TID 0000.0001) >
> (PID.TID 0000.0001) > &
> (PID.TID 0000.0001) >
> (PID.TID 0000.0001)
> (PID.TID 0000.0001) S/R DIAGNOSTICS_READPARMS, read namelist "diagnostics_list": start
> (PID.TID 0000.0001) S/R DIAGNOSTICS_READPARMS, read namelist "diagnostics_list": OK
> (PID.TID 0000.0001) S/R DIAGNOSTICS_READPARMS, read namelist "DIAG_STATIS_PARMS": start
>
>
>
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-support
_______________________________________________
MITgcm-support mailing list
MITgcm-support at mitgcm.org
http://mitgcm.org/mailman/listinfo/mitgcm-support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mitgcm.org/pipermail/mitgcm-support/attachments/20090730/7c9fa408/attachment.htm>
More information about the MITgcm-support
mailing list