[MITgcm-support] [MITgcm Manual] section 3.2 Obtaining the code
Chris Hill
cnh at mit.edu
Fri Jun 18 09:11:04 EDT 2004
Uli,
Sonya is sitting next to me. She says its fine for you to let Ed use your
account.
Chris
> -----Original Message-----
> From: mitgcm-support-bounces at mitgcm.org
> [mailto:mitgcm-support-bounces at mitgcm.org] On Behalf Of Uli
> Riemenschneider
> Sent: Friday, June 18, 2004 8:52 AM
> To: Patrick Heimbach
> Cc: Sonya Legg; mitgcm-support at mitgcm.org; cnh at MIT.EDU
> Subject: Re: [MITgcm-support] [MITgcm Manual] section 3.2
> Obtaining the code
>
> Hey,
>
> thanks for all those eager offers to help! I would me more
> than happy to give you access to my account if this is ok
> with Sonya ?? Basically the command 'make' failed, and I have
> attached the resulting error messages below. While searching
> for a solution to the problem I found that someone had
> already logged the same kind of problem on your web site before:
>
> http://mitgcm.org/testing/results/2004_05/tr_hopper_20040505_0
> /global_ocean.90x40x15/make.log
>
> Let me know what you think, and I can e-mail you my account
> details if you think it's easiest to get going that way.
>
> Uli
>
>
> f90 -c cd_code_checkpoint.F
>
> /*
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 1, Column = 1
> The characters found in the label field are not valid.
>
> This file created by convert_cpp_cmd2defines with the
> following command
> ^
>
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 2, Column = 2
> The characters found in the label field are not valid.
> ^
>
> f90-67 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line = 2,
> Column = 7
> Identifier length exceeds the maximum of 31 characters.
> ^
>
> f90-293 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 2, Column = 7
> This unnamed main program unit is missing an END statement.
>
> ^
> f90-724 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 2, Column = 73
> Unknown statement. Expected assignment statement but found "EOS"
> instead of "=" or "=>".
>
> line arguments:
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 3, Column = 2
> The characters found in the label field are not valid.
>
> Warning - this file is automatically generated - do NOT edit
> -bPACKAGES_CONFIG_H Disabled packages: -UALLOW_AIM
> -UALLOW_AIM_COMPON_INTERF -UALLOW_AIM_OCN_COUPLER
> -UALLOW_AIM_V23 -UALLOW_AUTODIFF -UALLOW_BULK_FORCE
> -UALLOW_CAL -UALLOW_CFC -UALLOW_COMPON_C
> ^
>
>
>
>
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 4, Column = 2
> The characters found in the label field are not valid.
>
> ^
>
>
>
>
> f90-7 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line = 4,
> Column = 7
> A construct name is not allowed on a assignment statement.
>
> ^
>
>
>
>
> f90-724 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 4, Column = 10
> Unknown statement. Expected assignment statement but found "-"
> instead of "=" or "=>".
>
> LLOW_MONITOR -DALLOW_RW
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 7, Column = 1
> The characters found in the label field are not valid.
>
> */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 8, Column = 1
> The characters found in the label field are not valid.
> ^
> f90-100 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 8, Column = 8
> This statement must begin with a label, a keyword, or an identifier.
>
>
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 9, Column = 1
> The characters found in the label field are not valid.
>
> /* Warning */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 10, Column = 1
> The characters found in the label field are not valid.
>
> /* - */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 11, Column = 1
> The characters found in the label field are not valid.
>
> /* this */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 12, Column = 1
> The characters found in the label field are not valid.
>
> /* file */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 13, Column = 1
> The characters found in the label field are not valid.
>
> /* is */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 14, Column = 1
> The characters found in the label field are not valid.
> ^
> f90-100 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 14, Column = 8
> This statement must begin with a label, a keyword, or an identifier.
>
> /* automatically */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 15, Column = 1
> The characters found in the label field are not valid.
>
> /* generated */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 16, Column = 1
> The characters found in the label field are not valid.
>
> /* - */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 17, Column = 1
> The characters found in the label field are not valid.
>
> /* edit */
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 20, Column = 1
> The characters found in the label field are not valid.
>
> #ifndef PACKAGES_CONFIG_H
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 21, Column = 1
> The characters found in the label field are not valid.
>
> #undef ALLOW_THSICE
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 56, Column = 1
> The characters found in the label field are not valid.
>
> #undef ALLOW_TIMEAVE
> ^
> f90-400 f90: ERROR MAIN__, File = PACKAGES_CONFIG.h, Line =
> 57, Column = 1
> The characters found in the label field are not valid.
>
> _RL UNSET_RL
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 42,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RS UNSET_RS
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 44,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL cg2dTargetResidual
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 504,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL cg2dTargetResWunit
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 505,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL cg3dTargetResidual
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 506,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL cg2dpcOffDFac
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 507,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL delR(Nr)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 508,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL delRc(Nr+1)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 509,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL delX(Nx)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 510,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL delY(Ny)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 511,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL deltaT
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 512,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL deltaTClock
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 513,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL deltaTmom
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 514,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL deltaTtracer
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 515,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL deltaTfreesurf
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 516,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL abeps
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 517,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL phiMin
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 518,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL thetaMin
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 519,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL rSphere
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 520,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL recip_RSphere
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 521,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL f0
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 522,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL freeSurfFac
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 523,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL implicSurfPress
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 524,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL implicDiv2Dflow
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 525,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL hFacMin
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 526,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL hFacMinDz
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 527,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL hFacMinDp
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 528,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL hFacMinDr
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 529,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL hFacInf
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 530,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL hFacSup
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 531,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL beta
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 532,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscAh
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 533,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscAhMax
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 534,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscAhGrid
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 535,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscAstrain
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 536,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscAtension
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 537,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscAr
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 538,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscA4
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 539,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscA4Max
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 540,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL viscA4Grid
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 541,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diffKhT
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 542,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diffKrT
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 543,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diffK4T
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 544,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diffKhS
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 545,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diffKrS
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 546,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diffK4S
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 547,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL delt
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 548,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL tauCD
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 549,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL rCD
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 550,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL gravity
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 551,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL recip_gravity
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 552,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL gBaro
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 553,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL rhonil
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 554,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL recip_rhonil
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 555,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL rhoConst
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 556,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL recip_rhoConst
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 557,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL rhoConstFresh
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 558,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL convertEmP2rUnit
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 559,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL tRef(Nr)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 560,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL sRef(Nr)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 561,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RS fCori(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 562,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RS fCoriG(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 563,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RS fCoriCos(1-OLx:sNx+OLx,1-OLy:sNy+OLy,nSx,nSy)
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 564,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL startTime
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 565,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL endTime
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 566,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL chkPtFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 567,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL pChkPtFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 568,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL dumpFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 569,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL adjDumpFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 570,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL diagFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 571,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL taveFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 572,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL tave_lastIter
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 573,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL monitorFreq
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 574,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL afFacMom
> ^
> f90-100 f90: ERROR CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 575,
> Column = 7
> This statement must begin with a label, a keyword, or an identifier.
>
> _RL afFacMom
> f90-214 f90: LIMIT CD_CODE_READ_CHECKPOINT, File = PARAMS.h,
> Line = 575
> The maximum number, 100, of fatal errors has been exceeded.
> *** Error code 2 (bu21)
>
>
> Patrick Heimbach wrote:
>
> >Hi Ulrike,
> >
> >the best would be if one us could get access
> >to your platform to see what's wrong.
> >We have been running the code on various o2k and o3k
> >so it's hopefully easy to fix on yours.
> >
> >Also, could you send us exactly which commands you
> >typed and when/how it failed?
> >
> >-Patrick
> >
> >
> >
> >Quoting Uli Riemenschneider <uriemenschneider at whoi.edu>:
> >
> >
> >
> >>Hi Ed,
> >>
> >>I am still not able to compile the version of the MIT code
> I downloaded
> >>on Monday. Neither Sonya nor one of her postdocs know what might be
> >>wrong (they might be using older versions of the code). The
> machine I'd
> >>like to run it on is a 4 -processor SGI Origin 200.
> >>
> >>Any other ideas how to get it going? Like I mentioned the command
> >>'gmake' is not recognised by this machine.
> >>Many thanks,
> >>Uli
> >>
> >>
> >>Ed Hill wrote:
> >>
> >>
> >>
> >>>Hi Ulrike,
> >>>
> >>>I've subscribed you to the MITgcm-support email list and
> below is the
> >>>follow-up message that was sent before you were subscribed.
> >>>
> >>>If "gmake" doesn't work, then please send more detailed information
> >>>about your particular machine and compiler and we'll try
> to help get it
> >>>working.
> >>>
> >>>Ed
> >>>
> >>>-----Forwarded Message-----
> >>>
> >>>
> >>>
> >>>
> >>>>From: Patrick Heimbach <heimbach at mit.edu>
> >>>>To: mitgcm-support at mitgcm.org
> >>>>Subject: Re: [MITgcm-support] [MITgcm Manual] section 3.2
> Obtaining the
> >>>>
> >>>>
> >>code
> >>
> >>
> >>>>Date: Mon, 14 Jun 2004 15:22:12 -0400
> >>>>
> >>>>Hi Ulrike,
> >>>>
> >>>>chances are good that the error messages will go
> >>>>if you type 'gmake' instead of 'make'
> >>>>Let us know if that doesn't fix it.
> >>>>
> >>>>Cheers
> >>>>-Patrick
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>--
> >>*********************************************************
> >>Ulrike Riemenschneider, Postdoctoral Investigator
> >>Physical Oceanography Dept. MS #21
> >>Woods Hole Oceanographic Institution
> >>Woods Hole, MA 02543, USA
> >>
> >>Phone: (+1) 508 289 2916
> >>Fax: (+1) 508 457 2181
> >>*********************************************************
> >>
> >>
> >>
> >>
> >>
> >
> >
> >--------------------------------------------------------
> >Patrick Heimbach Massachusetts Institute of Technology
> >FON: +1/617/253-5259 EAPS, Room 54-1518
> >FAX: +1/617/253-4464 77 Massachusetts Avenue
> >mailto:heimbach at mit.edu Cambridge MA 02139
> >http://www.mit.edu/~heimbach/ USA
> >
> >
> >
>
> --
> *********************************************************
> Ulrike Riemenschneider, Postdoctoral Investigator
> Physical Oceanography Dept. MS #21
> Woods Hole Oceanographic Institution
> Woods Hole, MA 02543, USA
>
> Phone: (+1) 508 289 2916
> Fax: (+1) 508 457 2181
> *********************************************************
>
>
> _______________________________________________
> MITgcm-support mailing list
> MITgcm-support at mitgcm.org
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-support
>
More information about the MITgcm-support
mailing list