[MITgcm-devel] labsea testreport crashes on ross

[An T Nguyen]

Hi Jean-Michel,

I'm running it here:
/net/ross/raid1/ifenty/An_adjoint_attempt/MITgcm/verification/lab_sea/

and the default optfile genmake2 found for my lab_sea/build/Makefile is
/net/ross/raid1/ifenty/MITgcm_current/MITgcm//tools/build_options/linux_amd64_gfortran

and output for testreport:
/net/ross/raid1/ifenty/An_adjoint_attempt/MITgcm/verification/tr_out.txt

I've wiped out that MITgcm directory twice and re-obtained the code, still with the same line of 
error.  Not sure why.

An

Jean-Michel Campin wrote:
> An,
> 
> I've just tried without loading any particular module,
> and it works fine (the 4 tests pass, all with 16 digits).
> I did not specify any optfile, like you did, I also get this:
>> No "OPTFILE" was explicitly specified by testreport,
>>    so the genmake default will be used.
> and the default optfile genmake2 found was linux_amd64_gfortran
> (you can find it at the top of lab_sea/build/Makefile).
> 
> Jean-Michel
> 
> On Thu, Dec 16, 2010 at 10:00:51PM -0500, Jean-Michel Campin wrote:
>> Hi An,
>>
>> Did you load a particular module ? I know that on ross there are
>> plenty of different compiler with many different version for 
>> each one, so just to know.
>>
>> Cheers,
>> Jean-Michel
>>
>> On Thu, Dec 16, 2010 at 06:24:56PM -0800, An T Nguyen wrote:
>>> Hello,
>>>
>>> I just checked out a clean MITgcm latest code and lab_sea verification on 
>>> ross.mit.edu, and testreport fails in all cases with this run-time error 
>>> message:
>>>
>>>> At line 4331 of file seaice_readparms.f
>>>> Fortran runtime error: Cannot match namelist object name seaice_cpair
>>> Below is the result from testreport produced using ./testreport -t 
>>> lab_sea as shown in the README file.  Could you check on this?  Am I 
>>> missing something?  This was running just fine back in July when I and 
>>> Ian tested on ross.  Thanks,
>>>
>>> An
>>>
>>>> more tr_out.txt
>>> Thu Dec 16 21:09:44 EST 2010
>>> run: ./testreport -t lab_sea
>>> on : Linux ross.mit.edu 2.6.9-89.33.1.ELsmp #1 SMP Mon Nov 15 19:02:30 
>>> EST 2010 x86_64 x86_64 x86_64 GNU/Linux
>>>
>>> No "OPTFILE" was explicitly specified by testreport,
>>>    so the genmake default will be used.
>>>
>>> default 10  ----T-----  ----S-----  ----U-----  ----V-----  --PTR 01--  
>>> --PTR 02--  --PTR 03-- --PTR 04--  --PTR 05--
>>> G D M    c        m  s        m  s        m  s        m  s        m  s    
>>>     m  s        m  s   m  s        m  s
>>> E p a R  g  m  m  e  .  m  m  e  .  m  m  e  .  m  m  e  .  m  m  e  .  m 
>>>  m  e  .  m  m  e  .  m  m  e  .  m  m  e  .
>>> N n k u  2  i  a  a  d  i  a  a  d  i  a  a  d  i  a  a  d  i  a  a  d  i 
>>>  a  a  d  i  a  a  d  i  a  a  d  i  a  a  d
>>> 2 d e n  d  n  x  n  .  n  x  n  .  n  x  n  .  n  x  n  .  n  x  n  .  n 
>>>  x  n  .  n  x  n  .  n  x  n  .  n  x  n  .
>>>
>>> Y Y Y N .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. N/O   lab_sea
>>> Y Y Y N .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. N/O   lab_sea.fd
>>> Y Y Y N .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. N/O   lab_sea.hb87
>>> Y Y Y N .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. N/O   lab_sea.salt_plume
>>> Start time:  Thu Dec 16 21:09:44 EST 2010
>>> End time:    Thu Dec 16 21:11:59 EST 2010
>>>
>>>
>>> _______________________________________________
>>> MITgcm-devel mailing list
>>> MITgcm-devel at mitgcm.org
>>> http://mitgcm.org/mailman/listinfo/mitgcm-devel
>> _______________________________________________
>> MITgcm-devel mailing list
>> MITgcm-devel at mitgcm.org
>> http://mitgcm.org/mailman/listinfo/mitgcm-devel
> 
> _______________________________________________
> MITgcm-devel mailing list
> MITgcm-devel at mitgcm.org
> http://mitgcm.org/mailman/listinfo/mitgcm-devel


-- 
An T. Nguyen, Ph.D. <atn at jpl.nasa.gov>
Jet Propulsion Lab, California Institute of Technology
MS 300-323, 4800 Oak Grove Dr, Pasadena CA 91109-8099
tel: 818-354-4122; fax: 818-393-6720