[MITgcm-devel] Genmake2 on SGI

[Alistair Adcroft]

I think the preferred common command was/should be

  genmake2

A.
--
Dr Alistair Adcroft            http://www.mit.edu/~adcroft
MIT Climate Modeling Initiative        tel: (617) 253-5938
EAPS 54-1624,  77 Massachusetts Ave,  Cambridge,  MA,  USA

-----Original Message-----
From: mitgcm-devel-bounces at mitgcm.org
[mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Chris Hill
Sent: Tuesday, June 29, 2004 2:27 PM
To: MITgcm-devel at mitgcm.org
Subject: RE: [MITgcm-devel] Genmake2 on SGI


Isn't the common command

 /bin/sh genmake2



 

> -----Original Message-----
> From: mitgcm-devel-bounces at mitgcm.org 
> [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Alistair Adcroft
> Sent: Tuesday, June 29, 2004 2:21 PM
> To: MITgcm-devel at mitgcm.org
> Subject: RE: [MITgcm-devel] Genmake2 on SGI
> 
> The cmd Patrick says does work but it defeats the objective of having 
> a common interface.
> 
> Gmake is not available everywhere which is why I'm running up against 
> this problem.
> 
> A.
> --
> Dr Alistair Adcroft            http://www.mit.edu/~adcroft
> MIT Climate Modeling Initiative        tel: (617) 253-5938
> EAPS 54-1624,  77 Massachusetts Ave,  Cambridge,  MA,  USA
> 
> -----Original Message-----
> From: mitgcm-devel-bounces at mitgcm.org
> [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Chris Hill
> Sent: Tuesday, June 29, 2004 2:17 PM
> To: MITgcm-devel at mitgcm.org
> Subject: RE: [MITgcm-devel] Genmake2 on SGI
> 
> 
> P.S. Does the command Patrick sent work for you?
> 
> > -----Original Message-----
> > From: mitgcm-devel-bounces at mitgcm.org 
> > [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of
> Alistair Adcroft
> > Sent: Tuesday, June 29, 2004 2:10 PM
> > To: MITgcm-devel at mitgcm.org
> > Subject: RE: [MITgcm-devel] Genmake2 on SGI
> > 
> > We were able to work fine using the minimal overlap between
> different
> > make's before so why not now?
> > 
> > A.
> > --
> > Dr Alistair Adcroft            http://www.mit.edu/~adcroft
> > MIT Climate Modeling Initiative        tel: (617) 253-5938
> > EAPS 54-1624,  77 Massachusetts Ave,  Cambridge,  MA,  USA
> > 
> > -----Original Message-----
> > From: mitgcm-devel-bounces at mitgcm.org
> > [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of Chris Hill
> > Sent: Tuesday, June 29, 2004 1:39 PM
> > To: MITgcm-devel at mitgcm.org
> > Subject: RE: [MITgcm-devel] Genmake2 on SGI
> > 
> > 
> > A.,
> > 
> >  I think its reasonable to expect gmake everywhere. That is the 
> > assumption that is even made at GFDL these days. make is
> really really
> > variable on different platforms and gmake is easily available for 
> > everryone on every platform as far as I know.
> > 
> > Chris
> > 
> > > -----Original Message-----
> > > From: mitgcm-devel-bounces at mitgcm.org 
> > > [mailto:mitgcm-devel-bounces at mitgcm.org] On Behalf Of
> > Alistair Adcroft
> > > Sent: Tuesday, June 29, 2004 1:33 PM
> > > To: MITgcm-devel at mitgcm.org
> > > Subject: [MITgcm-devel] Genmake2 on SGI
> > > 
> > > Ed,
> > > 
> > > I'm working down at WHOI and have run into two issues with
> > genmake2 on
> > > two different machines.
> > > 
> > > 1) the bash thing doesn't work. I see the workaround about how to 
> > > specify things with -bash but my reservations about using
> > bash and not
> > > sh are now strengthened.
> > > 2) we somehow have become dependent on gmake which is
> > simply not good
> > > enough
> > > - I don't know why but the SGI make fails where it used
> to work. We
> > > can not be dependent on gmake extensions because there will be 
> > > machines on which we can't install gmake.
> > > 
> > > It is not good practice to rely on work arounds such as
> options for
> > > specifying paths on different machines because it means users see 
> > > different interfaces on different machines and end up in total 
> > > confusion.
> > > 
> > > A.
> > > --
> > > Dr Alistair Adcroft            http://www.mit.edu/~adcroft
> > > MIT Climate Modeling Initiative        tel: (617) 253-5938
> > > EAPS 54-1624,  77 Massachusetts Ave,  Cambridge,  MA,  USA
> > > 
> > > 
> > > _______________________________________________
> > > MITgcm-devel mailing list
> > > MITgcm-devel at mitgcm.org
> > > http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> > > 
> > 
> > _______________________________________________
> > MITgcm-devel mailing list
> > MITgcm-devel at mitgcm.org
> > http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> > 
> > _______________________________________________
> > MITgcm-devel mailing list
> > MITgcm-devel at mitgcm.org
> > http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> > 
> 
> _______________________________________________
> MITgcm-devel mailing list
> MITgcm-devel at mitgcm.org 
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> 
> _______________________________________________
> MITgcm-devel mailing list
> MITgcm-devel at mitgcm.org
> http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel
> 

_______________________________________________
MITgcm-devel mailing list
MITgcm-devel at mitgcm.org http://dev.mitgcm.org/mailman/listinfo/mitgcm-devel